Oscilloscope

• High sensitivity with < 5 µW noise
• Ultra-fast throughput with sampling rates up to 250 kHz
• Accurate high-speed data analysis with jitter < 200 fs
• Compact design with smaller form factor

Oscilloscope

• 90 GHz bandwidth
• Custom host for optical, electrical and TDR/S parameter analysis
• Ultra-low jitter of 100 fs RMS and down to 250 μV ensures fast, accurate and consistent jitter measurements

BERT

• All-in-one built-in 4-channel BERT and sampling oscilloscope
• Bit Error Rate (BER) 4-channel simultaneous measurement
• High quality waveform PPG (1 ps rms jitter)
• High input sensitivity (10 mVp-p minimum input sensitivity)

Oscilloscope

• Two 50 GHz channels with 2.4 mm (male) connectors
• 50 and 30 GHz bandwidth settings available on each channel
• Test ± 2 VDC maximum output signal

Oscilloscope

• Optical interface bandwidth >80 GHz
• Electrical interface bandwidth >70 GHz
• Electrical interface resolution: <20 µV LSB (for 1 v full scale)

Oscilloscope

• Wavelength range: 1000-1600 nm
• Typical rms noise: 5 uW (10 GHz BW), 10 uW (15 GHz BW)
• Maximum average input power: 2 mW

Oscilloscope

Tektronix 80C07B High Frequency Oscilloscope Probe - Designed for accurate measurement, 500MHz bandwidth, 10X attenuation ratio, compatible with mainstream TDS series oscilloscopes. Original quality, to ensure signal integrity, suitable for electronic research and development, circuit debugging and high-speed signal analysis, is a reliable test partner for engineers' labs.

Oscilloscope

The 80C11B module is a wide-wavelength (1100 - 1650 nm), multirate optical interface sampling module optimized for testing 10 Gb/s datacom and telecom standard rates of 9.953, 10.3125, 10.51875, 10.664, 10.709, 11.0957, 11.317 Gb/s, 12.50, and 14.025 Gb/s. modules. With a high optical bandwidth of up to 30 GHz (typical), it is particularly well suited for general-purpose, high-performance 10 Gb/s optical device testing.

Oscilloscope

The N1046A Remote Sampling Head is a module for use with the N1000A DCA-X mainframe. Like all DCA modules from Isotek, the N1046A offers a wide range of configuration and performance options to fit your oscilloscope solution, whether it's bandwidth, channel count, or features.
• 75, 85, or >100 GHz maximum bandwidth (upgradeable)
• 1, 2 or 4 channels per module (user selectable)
• Large bandwidth and low-noise sampler for analyzing 224 Gb/s high-speed signals
• Electrical input: 1 mm negative (1.0 negative to 1.85 negative adapter included), 250 kSa/s sampling rate