Data Acquisition/Module

• The compact size of the USB digital multimeter eliminates the need for a large, heavy shipping case.
• Wide voltage and current ranges
• BenchVue software license BV0021B included with U2741A

Data Acquisition/Module

• Frequency range: 10 MHz to 20 GHz, covering C/Ku/Ka band satellite communication frequencies
• Power output range: -30 dBm to +13 dBm (expandable to +20 dBm with optional accessory)
• Phase noise: <-110 dBc/Hz @10 kHz offset (typical value at 1 GHz carrier)
• Frequency resolution: 0.1 Hz (high-stability temperature-controlled crystal oscillator reference)
• Local oscillator type: Low phase noise YIG oscillator (with active temperature compensation)

Data Acquisition/Module

- 3-slot mainframe with USB and LAN ports
- 6 1/2-bit (22 bit) built-in digital multimeter that can scan up to 250 channels per second
- 8 plug-in switch and control modules available

Data Acquisition/Module

Data Acquisition/Module

- 3-slot mainframe with USB, LAN and GPIB interfaces
- Six-and-a-half digit (22 bit) built-in digital multimeter scans up to 450 channels per second when combined with the new solid-state multiplexer module
- Choice of 9 plug-in switch and control modules

Data Acquisition/Module

- 20 Channel Actuator / General Purpose Switch
- SPDT (Type C) self-locking relay
- 300 V, 1 A excitation and control

Data Acquisition/Module

- 16-Channel Multiplexer
- 2-wire and 4-wire scanning
- 250 channels/second scan rate
- Built-in thermocouple reference junction

Data Acquisition/Module

- 20-Channel Multiplexer
- 2-Wire and 4-Wire Scan
- 300 V switch
- 60 channels/second scan rate
- Built-in thermocouple reference junction

Data Acquisition/Module

- Support a variety of data acquisition objects
- Supports free selection of various input/output modules to expand the I/O interface.
- Multi-channel data measurement, support for up to 100 channel inputs