PRODUCTS CENTER
PRODUCTS CENTER
86100D keysight
Optical communication test equipment
• 90 GHz bandwidth
• Custom host for optical, electrical and TDR/S parameter analysis
• Ultra-low jitter of 100 fs RMS and down to 250 μV ensures fast, accurate and consistent jitter measurements
• Custom host for optical, electrical and TDR/S parameter analysis
• Ultra-low jitter of 100 fs RMS and down to 250 μV ensures fast, accurate and consistent jitter measurements
N1092E keysight
Optical communication test equipment
• Ultra-fast throughput with sampling rates up to 250 kHz
• Accurate high-speed data analysis with jitter < 200 fs
• Compact design with smaller form factor
• Accurate high-speed data analysis with jitter < 200 fs
• Compact design with smaller form factor
34970A keysight
General electronic instruments
• 3-slot mainframe with built-in GPIB and RS232 interfaces
• 6 1/2-bit (22-bit) built-in digital multimeter that scans up to 250 channels per second
• 8 switch and control plug-in modules to choose from
• 6 1/2-bit (22-bit) built-in digital multimeter that scans up to 250 channels per second
• 8 switch and control plug-in modules to choose from
M8195A keysight
Arbitrary Waveform Generator
• Sampling rates up to 65 GSa/s
• High channel density: 1, 2 or 4 channels per module, up to 16 channels on 4 modules can be synchronized using the M8197A multi-channel synchronization module
• Built-in frequency and phase response calibration
• High channel density: 1, 2 or 4 channels per module, up to 16 channels on 4 modules can be synchronized using the M8197A multi-channel synchronization module
• Built-in frequency and phase response calibration
AQ6370D YOKOGAWA
Spectral Analyzer
• Wavelength range: 600~1700nm
• High wavelength accuracy: ±0.01nm
• High wavelength resolution: 0.02nm
• High wavelength accuracy: ±0.01nm
• High wavelength resolution: 0.02nm
MS9740B Anritsu
Spectral Analyzer
Same key features and performance as its predecessor, supporting a variety of production line environments
• Wide bandwidth (600 nm to 1750 nm) for evaluation of all optical active devices
• 9 application menus for measurements of LD modules, WDM, etc.
• Wide bandwidth (600 nm to 1750 nm) for evaluation of all optical active devices
• 9 application menus for measurements of LD modules, WDM, etc.
86105C Keysight
Optical communication test equipment
• 9 GHz amplified optical channel for 9/125 to 62.5/125 fiber
• 20 GHz electrical channel with 3.5 mm male input
• Singlemode and multimode amplification (750 to 1650 nm, SMF and MMF)
• 20 GHz electrical channel with 3.5 mm male input
• Singlemode and multimode amplification (750 to 1650 nm, SMF and MMF)
E5071C keysight
Network Analyzer
• Wide dynamic range: > 123 dB dynamic range at the test port (typical)
• Very fast measurement speed: 41 ms at full dual-port calibration, 1601 points
• Low trace noise: 0.004 dB rms at 70 kHz intermediate frequency bandwidth (IFBW)
• Very fast measurement speed: 41 ms at full dual-port calibration, 1601 points
• Low trace noise: 0.004 dB rms at 70 kHz intermediate frequency bandwidth (IFBW)
MP2100B Anritsu
Optical communication test equipment
• All-in-one built-in 4-channel BERT and sampling oscilloscope
• Bit Error Rate (BER) 4-channel simultaneous measurement
• High quality waveform PPG (1 ps rms jitter)
• High input sensitivity (10 mVp-p minimum input sensitivity)
• Bit Error Rate (BER) 4-channel simultaneous measurement
• High quality waveform PPG (1 ps rms jitter)
• High input sensitivity (10 mVp-p minimum input sensitivity)
