Product

Keysight 86100D Oscilloscope Eye Diagramming Optical Modules

2024.04.08
The Keysight 86100D is a high-performance, wide-bandwidth oscilloscope designed for precise and accurate measurements of high-speed digital designs for applications ranging from 50 Mb/s to more than 80 Gb/s. The device delivers excellent performance with high analogue bandwidth, low jitter and low noise to accurately characterise both optical and electrical designs.The 86100D DCA-X is the main model of the modular platform that allows users to perform precision optical, electrical, and TDR/TDT measurements by selecting different insertion modules.
Product

Difference between Anritsu MS9740B and MS9740A Spectrum Analysers?

2024.04.03
The main differences between the MS9740B and the MS9740A are the reduction in measurement processing time and the application of high-speed signal processing technology.The MS9740B reduces measurement processing time by half while maintaining the original functions and performance. This has been achieved by increasing productivity and reducing measurement and inspection time, thereby increasing the productivity of optical active equipment manufacturers.
Product

About AQ6377 YOKOGAWA Spectrum Analyser Essence of YOKOGAWA Spectrum Analyser, Bookmark this page!

2024.04.03
The AQ6377 is a spectrum analyser manufactured by Yokogawa Electric Corporation for environmental sensing and medical applications. It offers extended wavelength coverage from 1900 to 5500 nm and belongs to the mid-infrared (MWIR) region. The device employs dispersive spectroscopy technology to measure the optical spectrum of laser light in the range of 1.9 to 5.5 microns.
Product

M8195A Arbitrary Waveform Generator (AWG),The article is boring just collect it.

2024.04.01
The M8195A Keysight Arbitrary Waveform Generator (AWG), with a sample rate of up to 65 GSa/s and a bandwidth of 25 GHz, is capable of operating on up to four channels. The unit supports 8-bit vertical resolution and provides up to 16 GSa of waveform memory per AXIe module. It also enables a fully synchronised system of up to 16 channels using the M8197A synchronisation module.
Product

About MS9740A Anritsu Anritsu Spectrum Analyser Essentials, Bookmark this post!

2024.03.29
The MS9740A is a spectrum analyser manufactured by Anritsu for analysing optical signals in the wavelength range of 600 to 1750 nm.With its high-performance optical resolution and high-speed measurement capability, the MS9740A is capable of evaluating up to 300 channels of data and displaying the information required for WDM signal analysis, such as centre wavelength, level, signal-to-noise ratio, and so on.
Product

About MS9740B Anritsu Anritsu Spectrum Analyser Essentials, Bookmark this post!

2024.03.29
The MS9740B Spectrum Analyser is marketed primarily to the optical communications field where high accuracy, speed and wide dynamic range are required. Target user groups include, but are not limited to, R&D personnel in the optical communications industry, engineers manufacturing and evaluating 850 nm band VCSEL modules, and professionals conducting optical research and development.
Product

About N7776C Keysight Tunable Laser Source Essentials, Bookmark this post!

2024.03.27
The N7776C is a tunable laser source from Keysight Technologies featuring high power and lowest signal-to-noise (SSE). With an absolute wavelength accuracy of ±1.5 pm, the N7776C is a Tunable ECL laser type with a line/spectral bandwidth of less than 10 kHz. The N7776C supports a single-channel output with a maximum peak output power of ≥ +12 dBm or ≥ +13 dBm, an output power tuning range of ≥ +11 dBm (1515-1620 nm), and a signal-to-noise to SSE ratio of ≥ 80 dB/nm.
Product

DSOV334A Keysight Infiniium V-Series Oscilloscopes

2024.03.26
Keysight Infiniium V-Series oscilloscopes offer industry-leading accuracy, 33 GHz analogue bandwidth, 4 analogue channels, sampling rates up to 80 GSa/s and 2 Gpts of acquisition memory for more complete signal trace capture.
Product

About AQ6370D Spectrum Analyser Essentials, Bookmark it and save it!

2024.03.25
The AQ6370D is a spectrum analyser manufactured by Yokogawa Electric Corporation and is mainly used in the telecommunication field. It offers a wavelength range of 600 nm to 1700 nm for a wide range of testing needs. The unit is known for its high performance and accuracy, with high wavelength accuracy of ±0.01 nm and high wavelength resolution of 0.02 nm.
Product

N7776C keysight Tunable Laser Source Description

2024.03.20
The Keysight N7776C Select Series of tunable laser sources delivers outstanding accuracy and sub-picometre repeatability in static and scanning work, dramatically improving test efficiency.
Product

Customisation of the Yokogawa Spectrum Analyser OSA

2024.03.20
In fields involving light sources, such as telecommunications and active/passive device development, having a high-quality spectrum analyser can be the key to your success! When it comes to spectrum analysers, Yokogawa's AQ6370E is one of the most famous models in the industry. With a resolution as high as 5pm, wavelength accuracy as accurate as 5pm, and a wide wavelength testing range of 350-5500nm, the AQ6370E helps engineers easily improve their testing efficiency.
Product

100 Gbit/s Optical Module Evaluation Solution - MP2110A BER and Oscilloscope in One Instrument

2023.11.03
As network service providers introduce new applications and data volumes grow exponentially, 100G optical modules are being used in a large number of applications.
To improve productivity and save costs, optical module manufacturers are struggling to find inexpensive but scalable test instruments that can support a smooth upgrade from 10G to 25G or higher rates.
To improve production efficiency and save costs, optical module manufacturers are looking for inexpensive but scalable test instruments that can support a smooth upgrade from 10G to 25G or higher rates.
Designed for 100 GbE/25 GbE optical module production applications, the BERTWave MP2110A combines BERT (Bit Error Rate Test) and sampling oscilloscopes (Sample Oscilloscope).
BERT (bit error rate testing) and sampling oscilloscope (eye pattern analysis) in an integrated chassis. It improves the efficiency of optical module production and
also helps to reduce production costs.
Product

MP2110A Optical Module RINxOMA Test Methodology and Advantage Analysis

2023.11.03
RINxOMA is a metric used to evaluate the ratio of relative intensity noise (RIN) to optical modulation amplitude (OMA) of an optical module, which reflects the noise performance and signal quality of the optical module. This paper describes a method for RINxOMA testing using the MP2110A instrument and analyses the advantages and application scenarios of the method.
Product

Yokogawa AQ6373E Spectrum Analyzer - Analyzer APP Mode Accelerates R&D and Production Testing

2023.10.24
Yokogawa AQ6373E Spectrum Analysers - The same high performance level and improved operability features to meet a wide range of spectral measurement needs in R&D and production environments. Yokogawa has designed the Yokogawa AQ6373E and Yokogawa AQ6374E to meet the growing demand for testing new optical devices and components in the visible to near-infrared wavelength bands for medical, biological and materials processing applications.
Product

Yokogawa AQ6370E-Yokogawa Electric Releases High Performance Spectrum Analyser

2023.10.24
Yokogawa Electric Test & Measurement has announced the June 2023 release of the Yokogawa AQ6370E spectrum analyser. An upgrade to the popular Yokogawa AQ6370D, the new model is equipped with enhanced performance and usability features. Equally suitable for use in industry, universities and research institutes, this Yokogawa AQ6370E can be used to characterise a wide range of components, including lasers, optical transceivers and optical amplifiers for optical communications.
Product

How to Generate Various Types of Radar Signals Using the M8195A Arbitrary Waveform Generator

2023.10.17
The M8195A Arbitrary Waveform Generator is a high-performance signal source that can generate arbitrary waveforms with a sampling rate of up to 65 GSa/s and an analogue bandwidth of 25 GHz. It can be used to simulate a variety of complex signals, such as radar signals, optical communication signals, digital RF signals and so on. In this paper, we will introduce the methods and precautions for simulating radar signals using the M8195A Arbitrary Waveform Generator.
Product

How to test the performance of optical modules? What test and measurement equipment is needed?

2023.09.25
Optical module is a device that converts electrical signals into optical signals or optical signals into electrical signals, and it plays an important role in optical communication system. In order to ensure the normal operation of the optical module, we need to test its performance and detect whether it meets the relevant standards and specifications. So, how to test the performance of optical modules? This article will introduce you to some commonly used optical module test methods and test and measurement equipment.
Product

Optical Communication How to test TX\RX and what equipment is needed?

2023.09.25
TX and RX are two important concepts in a communication system, representing Transmitter and Receiver respectively. In a communication system, the Transmitter is responsible for converting information signals into electromagnetic waves and sending them out, and the Receiver is responsible for receiving the electromagnetic waves and reducing them to information signals. Therefore, testing the performance of TX and RX is an important step to ensure that the communication system works properly.
Product

PCIe TX/RX Physical Layer Signal Integrity Test Methods Explained

2023.09.25
PCIe has both a serial communications interface and a storage interface, unlike SAS and SATA, thus enabling additional industry scalability. PCIe supports full-duplex communication based on a point-to-point bus topology between the followers (system/host) and the endpoints (plug-ins). The specifications are developed and maintained by the PCI-SIG, an association of more than 900 companies.
Product

Arbitrary Waveform Generator: Simulating Real-World Signals

2023.09.22
In the field of electronic test and measurement, a signal source is a commonly used instrument that provides a variety of known or preset waveforms, such as sine, square, ramp, and pulse waves, for exciting a circuit or system under test and observing its response. However, sometimes we need to simulate real-world signals that are often irregular, random, complex, or contain multiple frequency components and modulations.
Product

What are the considerations for actual oscilloscope testing?

2023.09.22
Oscilloscope is a commonly used electronic test instrument, which can display and measure the waveform, amplitude, frequency, phase and other parameters of a signal. However, to use an oscilloscope correctly, not only to understand its functions and operating methods, but also to pay attention to some details and techniques in the actual test. In this article, we will introduce some of the oscilloscope actual test considerations, hope to help electronic engineers.
Product

25G Optical Module Eye Diagram, do you really understand? What test eye diagram equipment is needed?

2023.09.19
An eye diagram is a tool used to observe the quality and performance of a high-speed digital signal, which can reflect a lot of information about the signal, such as noise, jitter, inter-code crosstalk, extinction ratio, and signal-to-noise ratio. Eye diagram is a series of digital signals accumulated on the oscilloscope and displayed graphics, it is similar to the shape of an eye, hence the name. The size and clarity of the eye diagram can reflect the quality of the signal. Generally speaking, the larger and clearer the eye diagram is, the better the signal is; the smaller and blurrier the eye diagram is, the worse the signal is.
Products News-Megate  - General Electronic Test and Measurement Instruments Technology Services, Inc. Products News-Megate  - General Electronic Test and Measurement Instruments Technology Services, Inc.
Products News-Megate  - General Electronic Test and Measurement Instruments Technology Services, Inc. Products News-Megate  - General Electronic Test and Measurement Instruments Technology Services, Inc.
Product
09
2024-04

Keithley 2450 Source Measurement Unit Product Features

The Keithley 2450 is a high-performance digital source meter (SMU) that represents Keithley's new generation of measurement technology. The main functional features of this device include high-precision voltage and current sources capable of providing current outputs from fA level to A level and voltage outputs from mV level to V level, which are suitable for a wide range of precision measurements and experimental studies, such as semiconductor device testing.6 The 2450 employs advanced digital technology and capacitive touch-screen technology, which provides an intuitive graphical user interface (GUI) that makes operation more convenient and fast.

Translated with DeepL.com (free version)
View More
Product
08
2024-04

Keysight 86100D Oscilloscope Eye Diagramming Optical Modules

The Keysight 86100D is a high-performance, wide-bandwidth oscilloscope designed for precise and accurate measurements of high-speed digital designs for applications ranging from 50 Mb/s to more than 80 Gb/s. The device delivers excellent performance with high analogue bandwidth, low jitter and low noise to accurately characterise both optical and electrical designs.The 86100D DCA-X is the main model of the modular platform that allows users to perform precision optical, electrical, and TDR/TDT measurements by selecting different insertion modules.
View More
Product
03
2024-04

Difference between Anritsu MS9740B and MS9740A Spectrum Analysers?

The main differences between the MS9740B and the MS9740A are the reduction in measurement processing time and the application of high-speed signal processing technology.The MS9740B reduces measurement processing time by half while maintaining the original functions and performance. This has been achieved by increasing productivity and reducing measurement and inspection time, thereby increasing the productivity of optical active equipment manufacturers.
View More
Product
03
2024-04

About AQ6377 YOKOGAWA Spectrum Analyser Essence of YOKOGAWA Spectrum Analyser, Bookmark this page!

The AQ6377 is a spectrum analyser manufactured by Yokogawa Electric Corporation for environmental sensing and medical applications. It offers extended wavelength coverage from 1900 to 5500 nm and belongs to the mid-infrared (MWIR) region. The device employs dispersive spectroscopy technology to measure the optical spectrum of laser light in the range of 1.9 to 5.5 microns.
View More
Product
01
2024-04

M8195A Arbitrary Waveform Generator (AWG),The article is boring just collect it.

The M8195A Keysight Arbitrary Waveform Generator (AWG), with a sample rate of up to 65 GSa/s and a bandwidth of 25 GHz, is capable of operating on up to four channels. The unit supports 8-bit vertical resolution and provides up to 16 GSa of waveform memory per AXIe module. It also enables a fully synchronised system of up to 16 channels using the M8197A synchronisation module.
View More
Product
29
2024-03

What about SUITA SPAW7000 Power Analysis Recorder?

The SUITA SPAW7000 is a powerful power analyser and recorder, which provides 7 power input units and 2 motor input channels, and supports the combination of many types of power modules.110 This device is capable of high-precision power analysis and record storage, and is suitable for the measurement of voltage, current, power, efficiency and other parameters of inverters, motors, transformers and other power conversion devices. parameters.
View More
Product
29
2024-03

About MS9740A Anritsu Anritsu Spectrum Analyser Essentials, Bookmark this post!

The MS9740A is a spectrum analyser manufactured by Anritsu for analysing optical signals in the wavelength range of 600 to 1750 nm.With its high-performance optical resolution and high-speed measurement capability, the MS9740A is capable of evaluating up to 300 channels of data and displaying the information required for WDM signal analysis, such as centre wavelength, level, signal-to-noise ratio, and so on.
View More
Product
29
2024-03

About MS9740B Anritsu Anritsu Spectrum Analyser Essentials, Bookmark this post!

The MS9740B Spectrum Analyser is marketed primarily to the optical communications field where high accuracy, speed and wide dynamic range are required. Target user groups include, but are not limited to, R&D personnel in the optical communications industry, engineers manufacturing and evaluating 850 nm band VCSEL modules, and professionals conducting optical research and development.
View More
Product
27
2024-03

About N7776C Keysight Tunable Laser Source Essentials, Bookmark this post!

The N7776C is a tunable laser source from Keysight Technologies featuring high power and lowest signal-to-noise (SSE). With an absolute wavelength accuracy of ±1.5 pm, the N7776C is a Tunable ECL laser type with a line/spectral bandwidth of less than 10 kHz. The N7776C supports a single-channel output with a maximum peak output power of ≥ +12 dBm or ≥ +13 dBm, an output power tuning range of ≥ +11 dBm (1515-1620 nm), and a signal-to-noise to SSE ratio of ≥ 80 dB/nm.
View More
/
PREV
 1 2 3 4 5 6 7 ... 14