Product

2024.07.31

Product

2024.07.31

Product

2024.07.22

With the rapid advancement of 5G networks, optical communication technology has ushered in unprecedented changes. Dense wavelength division multiplexing (DWDM) systems have become the core of modern fiber optic communication networks due to their efficient data transmission capability and spectrum utilization. However, the dense channel distribution and high-speed data transmission in DWDM systems place higher requirements on the optical spectrum analyzer (OSA).

Product

2024.04.17

Anritsu demonstrated that its BERTWave MP2110A and MP1900A 56G PAM4 BERT can be combined to provide TDECQ measurements for 400Gbps optical chips and modules. This demonstrates that the MP1900A is a related product to the MP2110A and that the two can work together for specific types of testing.

Product

2024.03.29

The MS9740A is a spectrum analyser manufactured by Anritsu for analysing optical signals in the wavelength range of 600 to 1750 nm.With its high-performance optical resolution and high-speed measurement capability, the MS9740A is capable of evaluating up to 300 channels of data and displaying the information required for WDM signal analysis, such as centre wavelength, level, signal-to-noise ratio, and so on.

Product

2024.03.29

The MS9740B Spectrum Analyser is marketed primarily to the optical communications field where high accuracy, speed and wide dynamic range are required. Target user groups include, but are not limited to, R&D personnel in the optical communications industry, engineers manufacturing and evaluating 850 nm band VCSEL modules, and professionals conducting optical research and development.

Product

2024.03.26

Keysight Infiniium V-Series oscilloscopes offer industry-leading accuracy, 33 GHz analogue bandwidth, 4 analogue channels, sampling rates up to 80 GSa/s and 2 Gpts of acquisition memory for more complete signal trace capture.

Product

2024.03.25

The AQ6370D is a spectrum analyser manufactured by Yokogawa Electric Corporation and is mainly used in the telecommunication field. It offers a wavelength range of 600 nm to 1700 nm for a wide range of testing needs. The unit is known for its high performance and accuracy, with high wavelength accuracy of ±0.01 nm and high wavelength resolution of 0.02 nm.

Product

2024.03.06

The new N7779C Base Series tunable laser source, like the other new N777xC models, is ideal for cost-effective testing of broadband optical devices because of its ability to step quickly to discrete wavelengths with resolutions up to 0.1 pm and typical wavelength repeatability of ±3 pm. Short wavelength setup times (e.g., 300 ms) enable fast step scanning. Like other laser sources in the N777xC family, it delivers peak output power in excess of +12 dBm and low spontaneous emission levels. With power stability of ±0.01 dB per hour, it can also be used as a static local oscillator with a wide tuning range for receiver testing or transmission experiments.

Product

2024.02.29

The Keysight N7711A and N7714A tunable laser sources are available with a single port and four ports, respectively, in either C-band or L-band wavelength ranges. With narrow linewidths and finely adjustable bias grids, they are ideal for testing the real-world load performance of the latest launch systems. As with all other Yesotech tunable laser sources, all models can reach any wavelength point within their specified wavelength range.