Products News-Megate - General Electronic Test and Measurement Instruments Technology Services, Inc.

Keysight M8199B Ultra-High Performance Arbitrary Waveform Generator: Technical Analysis and Cutting-Edge Applications

The Keysight M8199B Arbitrary Waveform Generator (AWG) is one of the most powerful signal generation devices in the industry today, with a sampling rate of 256 GSa/s and an analog bandwidth of >80 GHz.

Keysight M8195A 65GSa/s Arbitrary Waveform Generator: A Benchmark Solution for High-Precision Signal Generation Technology

In microwave RF, high-speed digital communications and cutting-edge scientific research, the accuracy and bandwidth of signal generation directly determine the upper limit of the test system, Keysight M8195A, as a new generation of 65GSa/s Arbitrary Waveform Generator, builds an industry-leading performance benchmark with a combination of hard-core parameters such as 25GHz analog bandwidth, 14-bit vertical resolution, and 8GB of waveform storage depth per channel. performance benchmark.

keysight M8195A Broadband Pulse Radar Test Solution

The Wideband Pulse Radar Test Solution combines commercial off-the-shelf COTS modular hardware and software from Keysight Technologies, KJ Microwave, and Virginia Diodes to provide a flexible, multi-channel test bench for radar waveform generation and analysis.
Segmented memory acquisition in the digitiser uses a circular acquisition buffer with a minimum inter-segment dead time of 300 ns. This allows, for example, the capture of up to 64 million repetitive radar signals at relatively large repetition intervals.

Keysight E8363A Network Analyzer: High-Performance RF and Microwave Testing Solution

Keysight E8363A Vector Network Analyzer is a high-performance RF test instrument with a frequency range of 10 MHz to 40 GHz (extendable to 67 GHz). It supports S-parameter measurements, time-domain analysis (TDR), and noise figure testing. Featuring >130 dB dynamic range and ±0.03 dB amplitude accuracy, it is ideal for device characterization in 5G, radar, semiconductor and other fields. Offering 2/4-port configurations with SOLT/TRL calibration capabilities, and equipped with a touchscreen and GPIB/LAN interfaces, it is well-suited for both R&D and production line testing.

AQ6370D Spectrum Analyzer: Accurate Measurements with DWDM System

With the rapid advancement of 5G networks, optical communication technology has ushered in unprecedented changes. Dense wavelength division multiplexing (DWDM) systems have become the core of modern fiber optic communication networks due to their efficient data transmission capability and spectrum utilization. However, the dense channel distribution and high-speed data transmission in DWDM systems place higher requirements on the optical spectrum analyzer (OSA).

Anritsu MP2110A MP1900A Difference? BERTWave Eye Mapper Oscilloscope All-in-One

Anritsu demonstrated that its BERTWave MP2110A and MP1900A 56G PAM4 BERT can be combined to provide TDECQ measurements for 400Gbps optical chips and modules. This demonstrates that the MP1900A is a related product to the MP2110A and that the two can work together for specific types of testing.

About MS9740A Anritsu Anritsu Spectrum Analyser Essentials, Bookmark this post!

The MS9740A is a spectrum analyser manufactured by Anritsu for analysing optical signals in the wavelength range of 600 to 1750 nm.With its high-performance optical resolution and high-speed measurement capability, the MS9740A is capable of evaluating up to 300 channels of data and displaying the information required for WDM signal analysis, such as centre wavelength, level, signal-to-noise ratio, and so on.

About MS9740B Anritsu Anritsu Spectrum Analyser Essentials, Bookmark this post!

The MS9740B Spectrum Analyser is marketed primarily to the optical communications field where high accuracy, speed and wide dynamic range are required. Target user groups include, but are not limited to, R&D personnel in the optical communications industry, engineers manufacturing and evaluating 850 nm band VCSEL modules, and professionals conducting optical research and development.

DSOV334A Keysight Infiniium V-Series Oscilloscopes

Keysight Infiniium V-Series oscilloscopes offer industry-leading accuracy, 33 GHz analogue bandwidth, 4 analogue channels, sampling rates up to 80 GSa/s and 2 Gpts of acquisition memory for more complete signal trace capture.

About AQ6370D Spectrum Analyser Essentials, Bookmark it and save it!

The AQ6370D is a spectrum analyser manufactured by Yokogawa Electric Corporation and is mainly used in the telecommunication field. It offers a wavelength range of 600 nm to 1700 nm for a wide range of testing needs. The unit is known for its high performance and accuracy, with high wavelength accuracy of ±0.01 nm and high wavelength resolution of 0.02 nm.

N7779C keysight Tunable Laser Source Description

The new N7779C Base Series tunable laser source, like the other new N777xC models, is ideal for cost-effective testing of broadband optical devices because of its ability to step quickly to discrete wavelengths with resolutions up to 0.1 pm and typical wavelength repeatability of ±3 pm. Short wavelength setup times (e.g., 300 ms) enable fast step scanning. Like other laser sources in the N777xC family, it delivers peak output power in excess of +12 dBm and low spontaneous emission levels. With power stability of ±0.01 dB per hour, it can also be used as a static local oscillator with a wide tuning range for receiver testing or transmission experiments.

N7714A keysight keysight Single Port Tunable Laser Source System Description

The Keysight N7711A and N7714A tunable laser sources are available with a single port and four ports, respectively, in either C-band or L-band wavelength ranges. With narrow linewidths and finely adjustable bias grids, they are ideal for testing the real-world load performance of the latest launch systems. As with all other Yesotech tunable laser sources, all models can reach any wavelength point within their specified wavelength range.

Products News-Megate - General Electronic Test and Measurement Instruments Technology Services, Inc.

Products News-Megate - General Electronic Test and Measurement Instruments Technology Services, Inc.

Products News-Megate - General Electronic Test and Measurement Instruments Technology Services, Inc.

Products News-Megate - General Electronic Test and Measurement Instruments Technology Services, Inc.

Difference between Santec TSL-550 and TSL-570 tunable lasers?

The Santec TSL-570 improves on the TSL-550 in terms of scanning speed, wavelength accuracy, and output optical power, and adds a touch screen and richer communication interfaces for a wider range of application scenarios. If you need faster scanning speed and higher output optical power, or more convenient operation, the TSL-570 may be a better choice. However, if the budget is limited or the demand for some specific applications is not particularly high, the TSL-550 is still a reliable choice.

YOKOGAWA AQ6373E/AQ6373B Yokogawa Spectrum Analyser Description

The Yokogawa AQ6373E/AQ6373B Spectrum Analyzer is a high-performance optical spectrum analyser optimised for visible wavelength measurement. It covers the wavelength range from 350 nm to 1200 nm with high resolution and close dynamic range, making it suitable for spectral measurement needs in fields such as medical, biological, and materials processing.

81600B keysight tunable laser source description

The KEYSIGHT 81600B is a tunable laser source module for a wide range of applications in optical communications and optical testing. The series achieves high signal-to-noise ratio (>70 dB/nm) through low Self-Source Emission (low SSE) technology and features fast and accurate scanning capability covering the full wavelength range from 1260 nm to 1640 nm with no wavelength gap. In addition, the 81600B is equipped with a built-in high-performance 60 dB attenuator and a high-precision wavelength meter (±3.6 pm) to ensure excellent measurement performance.

N7745A Keysight Multi-Port Optical Power Meter Description

The N7745A Optical Power Meter is designed to characterise multi-port optical devices and is suitable for testing multi-port devices such as multiplexers, PON splitters, wavelength selective switches (WSS) and ROADMs.

SMA100B RF and microwave signal generator Rohde & Schwarz

The R&S®SMA100B RF and microwave signal generator delivers uncompromising maximum performance. It provides the purest output signals while maintaining the highest output power levels with the lowest harmonics, far outpacing the competition. As the world's leading signal generator, it can handle the most demanding module and system T&M tasks in the RF semiconductor, wireless communications, aerospace and defense industries.

N1000A Keysight DCA-X Wide Bandwidth Oscilloscope Mainframe Description

Keysight N1000A DCA-X Wide Bandwidth Oscilloscope Mainframe is manufactured by Keysight, which is a high-end professional grade test equipment. Its target user groups include but are not limited to engineers and technicians in the electronics manufacturing, semiconductor design and test, communications equipment development and other industries.

Tektronix DSA8300 Optical Module Testing

The Tektronix DSA8300 is an advanced equivalent time sampling oscilloscope that offers the highest fidelity measurement and analysis capabilities. This means it is able to capture very subtle signal variations, ensuring that the accuracy and reliability of data transmission is guaranteed in complex communications environments.

Tektronix DSA8300 TDR Impedance Test Operating Guide

The DSA8300 is a high-performance digital sampling oscilloscope from Tektronix designed for applications such as communications signal analysis, serial data network analysis, and serial data link analysis.The DSA8300 features excellent acquisition throughput of up to 300 kS/s, which enables it to significantly reduce time in manufacturing or equipment qualification testing. In addition, it supports a wide range of optical interface test solutions, from 115 Mb/s to 100 Gb/s and beyond, covering a broad wavelength range for singlemode and multimode fibre.

E4980A Keysight Precision LCR Meter Description

The Keysight E4980A is a precision LCR meter with a frequency range of 10 Hz to 2 MHz. It offers excellent measurement speed and accuracy in both low and high impedance conditions, with a basic impedance accuracy of 0.05 per cent.The E4980A also features fast measurement speeds of 5.6 ms for short-time measurements, 88 ms for medium-time measurements, and 220 ms for long-time measurements.

1 2 3 4 5 6 7 ... 19