Pressure eye test, an important indicator for evaluating the performance of 25-28G optical receivers, is mainly to verify the degree of tolerance of the receiving end to poor signals. The related equipments used here are: AXIe mainframe M9502A+M8195A AWG module+M9537A built-in PC controller, M9505A mainframe+M8046A high-performance BER+M8045A code generator, Remote Head M8057A, DCA-M N1092C,8164B lightwave mainframe system, which is integrated with the light sources such as 81608A+81942A Reference Receiver+81577A Attenuator. There are also some small parts such as combiner, directional coupler, several optical fibers, several adapters.

Oscilloscope performance indicators, oscilloscope bandwidth, oscilloscope channel number, oscilloscope sampling rate, oscilloscope memory depth, oscilloscope waveform capture rate, oscilloscope, oscilloscope performance, oscilloscope indicators

A wide range of measurements can be performed on waveforms using a digital oscilloscope. The range and complexity of measurements depends on the oscilloscope's feature set. The figure shows a blank display of a Keysight 8000 Series oscilloscope. Note the measurement buttons/icons listed on the far left side of the screen. These icons can be dragged onto the waveform using the mouse, and the measurement will be calculated. These icons are also convenient because the icons themselves tell you what measurement is being taken.

With the rapid development of cloud computing, big data and other technologies, the scale of data centers is getting larger and larger, and the demand for higher data transmission rate and bandwidth is becoming more and more urgent. And optical interconnection technology, as an efficient and reliable data transmission method, is favored by many data centers.

High-speed sampling oscilloscopes are mainly used for optical eye diagram testing of optical transmitters, electrical eye diagram testing of optical modules and AOCs, etc. They can also be used for signal calibration in future electrical receiver and optical receiver tolerance testing. High-speed BER instruments are mainly used for generating high-quality electrical signal excitation and BER testing in optical transmitter (optical eye diagram) testing, and can also be used for generating electrical signals with jitter and stress to verify the receiving tolerance in electrical receiver and optical receiver tolerance testing.

Typically, oscilloscopes are operated using knobs and buttons on the front panel. In addition to the controls on the front panel, many high-end oscilloscopes are now equipped with an operating system, so they can be operated in the same way as a computer. You can connect a mouse and keyboard to the oscilloscope and use the mouse to adjust the controls by using the pull-down menus and buttons on the display. In addition, some oscilloscopes are equipped with touchscreens that allow you to access menus using a stylus or your fingertips.

An oscilloscope is a test and measurement instrument used to display a variable as a function of another variable. For example, it can plot voltage (y-axis) versus time (x-axis) on a display. Figure 10 is an example of such a graph. This is very useful if you want to test whether an electronic component is working properly. If you know what the signal waveform should look like when the component is removed, you can use an oscilloscope to see if the component is actually outputting the correct signal.

The main purpose of an oscilloscope is to give an accurate visual display of the electrical signal. For this reason, signal integrity is very important. Signal integrity is the ability of an oscilloscope to reconstruct a waveform so that it accurately represents the original signal. If the signal integrity of an oscilloscope is low, it is useless. Because when the waveform on the oscilloscope does not have the same shape or characteristics as the real signal, it is meaningless to perform the test. However, it is important to remember that no matter how good the oscilloscope is, the waveform on the oscilloscope is never an accurate representation of the real signal. This is because when you connect an oscilloscope to a circuit, the oscilloscope has become part of the circuit. In other words, there is some load effect. Although instrument manufacturers strive to minimize load effects, they are always present to some degree.

The guide provides an overview of the basics of oscilloscopes. The concept of oscilloscopes and how to use them will be understood in detail. We will get you up to speed on the basic measurement and performance characteristics of an oscilloscope by discussing some of its applications. We will also introduce some of the different types of probes and discuss their advantages and disadvantages.