DAQ970A data collector from keyshight replace the 34970A?
The 34970A's next-generation data collector, the DAQ970A, achieves a 24-bit sampling rate of 800 kSa/s. The DAQ970A data acquisition system has a built-in six-and-a-half-digit digital multimeter and an auto-calibration function that effectively compensates for internal drift due to time and temperature variations. It also features built-in USB and LAN interfaces.
Model：DAQ970A
Name: Data acquisition system
Brand：Yeide(keyshight)
Category: General electronic test > Data acquisition system
Comparison of the parameters of the two products:
34970A Data Acquisition
3-slot mainframe with USB and LAN interfaces
Choice of 9 plug-in switch and control modules
24-bit sampling rate of 800 kSa/s with the new DAQM909A 4-channel digitizer module
Built-in signal conditioning for thermocouple, RTD and thermistor measurements, DC/AC voltage and current, resistance, frequency/cycle, diode testing, and capacitance
Non-volatile memory stores up to 100,000 readings and retains data in the event of a power failure
DAQ970A Digital Recording System
6 1/2-bit (22-bit) built-in digital multimeter, scanning up to 250 channels per second
3-slot mainframe with 8 switch and control insert modules to choose from
Measures 11 different parameters such as temperature, DC/AC voltage, current, resistance, frequency and period
GPIB and RS-232 interfaces as standard
BenchLink Data Logger software for test setup, data acquisition and archiving, real-time display and analysis
Keysight is the new data collector that replaced the 34970A with the DAQ970A, which has a new generation of high-speed digital multimeter module built into it, with the same 6.5-bit resolution. The interface and RS232 serial communication have become obsolete, not easy to operate and connect to a computer for acquisition, after all, many computers now do not have RS232 serial port.
The 34970A's next-generation data collector, the DAQ970A, achieves a 24-bit sampling rate of 800 kSa/s. The DAQ970A data acquisition system has a built-in six-and-a-half-digit digital multimeter and an auto-calibration function that effectively compensates for internal drift due to time and temperature variations. It also features built-in USB and LAN interfaces.
Model：DAQ970A
Name: Data acquisition system
Brand：Yeide(keyshight)
Category: General electronic test > Data acquisition system
Comparison of the parameters of the two products:
34970A Data Acquisition
3-slot mainframe with USB and LAN interfaces
Choice of 9 plug-in switch and control modules
24-bit sampling rate of 800 kSa/s with the new DAQM909A 4-channel digitizer module
Built-in signal conditioning for thermocouple, RTD and thermistor measurements, DC/AC voltage and current, resistance, frequency/cycle, diode testing, and capacitance
Non-volatile memory stores up to 100,000 readings and retains data in the event of a power failure
DAQ970A Digital Recording System
6 1/2-bit (22-bit) built-in digital multimeter, scanning up to 250 channels per second
3-slot mainframe with 8 switch and control insert modules to choose from
Measures 11 different parameters such as temperature, DC/AC voltage, current, resistance, frequency and period
GPIB and RS-232 interfaces as standard
BenchLink Data Logger software for test setup, data acquisition and archiving, real-time display and analysis
Keysight is the new data collector that replaced the 34970A with the DAQ970A, which has a new generation of high-speed digital multimeter module built into it, with the same 6.5-bit resolution. The interface and RS232 serial communication have become obsolete, not easy to operate and connect to a computer for acquisition, after all, many computers now do not have RS232 serial port.
