The keysight 86100D oscilloscope is available with two user interfaces, the classic DCA user interface and the new FlexDCA user interface. The classic DCA user interface is fully compatible with the 86100C DCA-J oscilloscope and is very familiar to use. the FlexDCA user interface is vector-based and offers additional signal analysis features such as de-embedding/embedding, equalization, phase-locked loops, phase noise, customized analysis, and more. It is possible to switch between the two user interfaces according to your needs with the touch of a button on the screen.

Instrument self-test refers to the use of instrumentation units or individuals, in accordance with certain methods and cycles, the performance and accuracy of the instrumentation to check and evaluate the process. The purpose of self-test is to ensure the reliability and accuracy of the instruments and prevent the quality of production, scientific research, testing and other work from being affected by the failure or error of the instruments and meters. The methods and standards of self-inspection should be determined according to the type, use, requirements and other factors of the instrumentation, generally including visual inspection, functional inspection, precision inspection, etc. The results of self-inspection should be recorded in the instrumentation manual. The results of self-inspection should be recorded in the self-inspection record sheet of the instrumentation, and the problems found should be dealt with in time.

FlexDCA software runs on the YesTech Digital Communications Analyzer (DCA) family of sampling oscilloscopes (also known as equivalent time oscilloscopes). DCA can help you display and analyze the analog properties of high-speed signals, such as those used in wireline communications and data center links.FlexDCA is installed by the manufacturer on the DCA-X mainframe, or it can be installed on a computer to control the DCA-M or remotely control the DCA-X.

This paper proposes a simple solution for the 86100D DCA-X oscilloscope communication, the main ways of communication are: LAN connection, GPIB connection, the 86100D DCA-X oscilloscope combines high analog bandwidth, low jitter and low noise performance, and is able to accurately characterize optical and electrical designs ranging from 50Mb/s to 40Gb/s (and above).

DWDM and CWDM are two optical wavelength division multiplexing technologies that multiplex multiple optical signals of different wavelengths into a single optical fiber for transmission, improving fiber utilization and transmission capacity.

XGS-PON is a symmetric 10G PON technology, which is the technical evolution of GPON and XG-PON.XGS-PON can share the same optical distribution network (ODN) with GPON and XG-PON, and supports the mixed access of three types of ONUs.XGS-PON's coexistence scheme mainly relies on the Combo Optical Module and the wavelength division multiplexing (WDM) technology to realize the separation and multiplexing of optical signals of different wavelengths and rates. The XGS-PON coexistence solution mainly relies on Combo Optical Module and Wavelength Division Multiplexing (WDM) technology, which realizes separation and multiplexing of optical signals of different wavelengths and rates.

Optical module is an optoelectronic device used to realize the conversion between optical and electrical signals. The main components of an optical module are optical transmitters, optical receivers, functional circuits and optical interfaces, etc. SFP optical modules are optoelectronic devices used to convert between gigabit electrical and optical signals.SFP+ optical modules are small, hot-swappable optical transceiver modules mainly used in 10 Gbps Ethernet and Fibre Channel systems, which can realize network expansion and conversion in data centers. .

Yokogawa AQ6370D YOKOGAWA Spectrum Analyzer Troubleshooting, Repair and Solutions, Yokogawa AQ6370D Spectrum Analyzer is a spectrum analyzer with world-class optical performance that can be used to measure and analyze wavelengths, powers, spectra, and other parameters of a variety of light sources.

Equipment for RF and Microwave Radar Testing - E8257D PSG Analog Signal Generator Keysight Yesde, RF and microwave radar is a technology that uses radio waves to detect and measure targets, and it has a wide range of applications in automotive, communications, military, meteorological, medical and other fields. In order to ensure the performance and reliability of RF and microwave radar, it needs to be rigorously tested and verified. And one of the key equipments for testing and verifying RF and microwave radar is the signal generator.