N1092A keysight DCA-M sampling oscilloscope (single optical channel)

2022-11-02
View:1535
Tags:

The N1092A keysight DCA-M sampling oscilloscope features a highly accurate, low-cost solution for optical waveform analysis, including solutions offering 8.4 to 64 Gbaud, very low noise and jitter, fast sampling rates for high throughput, and integrated clock recovery.


  • Model:N1092A 

  • Name: DCA-M sampling oscilloscope

  • Brand:KEYSIGHT

  • Category: General electronic test > DCA-M sampling oscilloscope

  • Product attributes: host



Functionality

  • High sensitivity with < 5 µW noise

  • Ultra-fast throughput with sampling rates up to 250 kHz

  • Accurate high-speed data analysis with jitter < 200 fs

  • Compact design with smaller form factor

  • Unfiltered bandwidth > 40 GHz (option 40A)

  • Integrated clock recovery available (option CDR)




Connect N1092A/B/C/D/E method


Method 1. Connect directly to the PC of N1092A/B/C/D/E with USB cable.

Connect 86100D or N1000A host PC to N1092A/B/C/D/E with USB cable.(The host PC can be controlled by GPIB or other ways.Then the host computer can be controlled by GPIB or LAN).



Method 2. For automatic test system environment, the easiest and best method is to control

For an automated test system environment, the simplest and preferred method of controlling the N1092A/B/C/D/E is to connect the main test system PC to a low cost modern PC via LAN. the FlexDCA interface is located on the FlexDCA interface is located on a second PC.


The second PC is then connected to the N1092A/B/C/D/E via USB. Connection via USB. This eliminates most of the compatibility problems between existing test system PCs and the N1092A/B/C/D/E. Most of the compatibility problems between the N1092A/B/C/D/E hardware and can greatly simplify the conversion of the 86100D system to the N1092A/B/C/D/E system



N1092A keysight DCA-M sampling oscilloscope (single optical channel)
2022-11-02
Tags:

The N1092A keysight DCA-M sampling oscilloscope features a highly accurate, low-cost solution for optical waveform analysis, including solutions offering 8.4 to 64 Gbaud, very low noise and jitter, fast sampling rates for high throughput, and integrated clock recovery.


  • Model:N1092A 

  • Name: DCA-M sampling oscilloscope

  • Brand:KEYSIGHT

  • Category: General electronic test > DCA-M sampling oscilloscope

  • Product attributes: host



Functionality

  • High sensitivity with < 5 µW noise

  • Ultra-fast throughput with sampling rates up to 250 kHz

  • Accurate high-speed data analysis with jitter < 200 fs

  • Compact design with smaller form factor

  • Unfiltered bandwidth > 40 GHz (option 40A)

  • Integrated clock recovery available (option CDR)




Connect N1092A/B/C/D/E method


Method 1. Connect directly to the PC of N1092A/B/C/D/E with USB cable.

Connect 86100D or N1000A host PC to N1092A/B/C/D/E with USB cable.(The host PC can be controlled by GPIB or other ways.Then the host computer can be controlled by GPIB or LAN).



Method 2. For automatic test system environment, the easiest and best method is to control

For an automated test system environment, the simplest and preferred method of controlling the N1092A/B/C/D/E is to connect the main test system PC to a low cost modern PC via LAN. the FlexDCA interface is located on the FlexDCA interface is located on a second PC.


The second PC is then connected to the N1092A/B/C/D/E via USB. Connection via USB. This eliminates most of the compatibility problems between existing test system PCs and the N1092A/B/C/D/E. Most of the compatibility problems between the N1092A/B/C/D/E hardware and can greatly simplify the conversion of the 86100D system to the N1092A/B/C/D/E system