PRODUCTS CENTER
PRODUCTS CENTER
8169A Agilent
Optical communication test equipment
• High accuracy and repeatability of the output polarization state: +/-0.09° on Poincar? Sphere
• Low wavelength dependence of the output polarization state: +/- 0.1°/nm on Poincar?
• Polarization extinction ratio >45dB (1530 nm - 1560 nm)
• Low wavelength dependence of the output polarization state: +/- 0.1°/nm on Poincar?
• Polarization extinction ratio >45dB (1530 nm - 1560 nm)
86117A keysight
Oscilloscope Module
• Two 50 GHz channels with 2.4 mm (male) connectors
• 50 and 30 GHz bandwidth settings available on each channel
• Test ± 2 VDC maximum output signal
• 50 and 30 GHz bandwidth settings available on each channel
• Test ± 2 VDC maximum output signal
86105C Agilent
Optical communication test equipment
• 9 GHz amplified optical channel for 9/125 to 62.5/125 fiber
• 20 GHz electrical channel with 3.5 mm male input
• Singlemode and multimode amplification (750 to 1650 nm, SMF and MMF)
• 20 GHz electrical channel with 3.5 mm male input
• Singlemode and multimode amplification (750 to 1650 nm, SMF and MMF)
E4809A Agilent
Oscilloscope Module
• Parallel BER Tester
• 81200: Configurable for 675 Mb/s to 2.7 Gb/s analysis
• 81250: Configurable for 675 Mb/s to 45 Gb/s analysis
• Modular BER test platform
• Generates and analyzes PRWS, PRBS and user-defined patterns
• 81200: Configurable for 675 Mb/s to 2.7 Gb/s analysis
• 81250: Configurable for 675 Mb/s to 45 Gb/s analysis
• Modular BER test platform
• Generates and analyzes PRWS, PRBS and user-defined patterns
8164A Agilent
Oscilloscope Module
• 8164A Agilent Optical Wave Measurement System
N4873A Agilent
Oscilloscope Module
• Data range: 500 Mb/s to 13.5 Gb/s
• Range: 0.1 to 1.8V (2.0V, at connector)
• Jump time (10%-90%): <12ps
• Jitter: < 7ps
• Range: 0.1 to 1.8V (2.0V, at connector)
• Jump time (10%-90%): <12ps
• Jitter: < 7ps
N4872A Agilent
Oscilloscope Module
• Data range: 500 Mb/s to 13.5 Gb/s
• Range: 0.1 to 1.8V (2.0V, at connector)
• Jump time (10%-90%): <12ps
• Jitter: < 7ps
• Range: 0.1 to 1.8V (2.0V, at connector)
• Jump time (10%-90%): <12ps
• Jitter: < 7ps
E4861A Agilent
Oscilloscope Module
• Data output: differential or single-ended
• Amplitude: 0.5 to 1.8V pp
• Conversion time (20%-80%): 90ps typical @ ECL, LVDS
• Amplitude: 0.5 to 1.8V pp
• Conversion time (20%-80%): 90ps typical @ ECL, LVDS
U2701A Keysight
Oscilloscope Module
• 100 MHz
• 2 analog channels
• 32 Mpts deep memory and high sampling rate of 1 GSa/s
• Easy USB setup and plug-and-play support
• 2 analog channels
• 32 Mpts deep memory and high sampling rate of 1 GSa/s
• Easy USB setup and plug-and-play support
