General electronic instruments

- High power accuracy: ± (0.1% of reading + 0.05% of range)
- 3 power measurement channels, can be flexibly selected according to the actual application scenario
- Bandwidth: DC, 0.5Hz-100KHz
- Maximum voltage measurement range 1500V, maximum current measurement range 50A

Data Acquisition/Module

- 3-slot mainframe with USB, LAN and GPIB interfaces
- Six-and-a-half digit (22 bit) built-in digital multimeter scans up to 450 channels per second when combined with the new solid-state multiplexer module
- Choice of 9 plug-in switch and control modules

Data Acquisition/Module

- 20 Channel Actuator / General Purpose Switch
- SPDT (Type C) self-locking relay
- 300 V, 1 A excitation and control

Data Acquisition/Module

- 16-Channel Multiplexer
- 2-wire and 4-wire scanning
- 250 channels/second scan rate
- Built-in thermocouple reference junction

Data Acquisition/Module

- 20-Channel Multiplexer
- 2-Wire and 4-Wire Scan
- 300 V switch
- 60 channels/second scan rate
- Built-in thermocouple reference junction

Polarization Synthesizer

• Signalling support for multiple radio access technologies: LTE, WCDMA, GSM, WLAN, Bluetooth
• LTE-Advanced: 8 DL CC, up to 4x4/8x2 MIMO fading, 2 UL CAs
• WLAN 11 a/b/g/n/ac/ax SISO and MIMO signalling testing
• Internal server for application testing

Polarization Synthesizer

• Continuous frequency range up to 6 GHz and RF bandwidth up to 160 MHz
• Parallel testing on up to eight bi-directional RF ports
• Multiple methods to reduce test time and maximise equipment utilisation
• Outstanding measurement performance and accuracy
• Fanless design ensures quiet operation - Dust-tight enclosure for best-in-class reliability

Analog Signal Generator

• Frequency range: 8 kHz to 3, 6, 12.75, 20, 31.8, 40, 50 and 67 GHz (overrange up to 72 GHz)
• SSB phase noise of –132 dBc (typ.) at 10 GHz and 10 kHz offset
• Wideband noise of –162 dBc (meas.) at 10 GHz and 30 MHz offset
• Maximum output power exceeds 30 dBm across wide frequency ranges
• Exceptionally low harmonics

Semiconductor Analysers

• Switch between CV and IV measurements without re-cabling.
• Capture ultra-fast transient phenomena not possible with other conventional test instruments.
• Detect multi-frequency AC capacitance measurements from a range of 1 kHz to 5 MHz.