Oscilloscope

• One 90 GHz (standard)/120 GHz (optional) optical channel
• Jitter as low as 90 fs
• Ideal for analyzing 112 GBd (224 Gbps) optical signals or any application that require ultra• wide optical receiver > 65 GHz bandwidth (-3 dBo)
• Impulse response correction (Option IRC) is a standard feature and hardware filters for standards-based rates are optional
• Protect your investment: works with both the N1000A (250 kSa/s sampling rate) and 86100D (40 kSa/s sampling rate) mainframes

Optical/Electrical Clock Recovery

• 125 MBd to 64 GBd data rate range (continuous) on electrical and optical NRZ and PAM4 data signals
• Standards-compliant clock recovery (“Golden PLL”) with adjustable peaking and loop bandwidth to 20 MHz
• Lock onto degraded signals (“closed eyes”) using an built-in equalizer (Option EVA)
Gain insight into root cause(s) for jitter using Jitter Spectrum Analysis (Option JSA)
• Perform compliant PLL bandwidth and peaking measurements using N1010300A FlexPLL Application software and N1081PLCA PCI Express PLL Test Application

Optical Spectral Analyzer

• Spectral resolution as high as 2 GHz
• Wavelength accuracy as high as ± 0.0001 nm
• Optical rejection ratio > 40 dB
• Operation available from 375 nm to 12 μm

Optical Spectral Analyzer

• Wavelength range: 350 to 1750nm
• High wavelength accuracy: ±0.05nm
• High wavelength resolution: 0.05 to 10 nm
• Wide dynamic range: 60dB (peak ±1.0nm)
• Wide level range: +20 to -80dBm
• Fast measurement: 0.5 sec. (100nm span)

Optical Spectral Analyzer

• Wide wavelength range: 350 - 1750 nm
• High wavelength resolution: 0.05 nm (full wavelength range)
• High wavelength accuracy: ±0.05 nm (633/1523 nm), ±0.2 nm (350 - 1750 nm)
• Close-in dynamic range: 60 dB (λPK ±1 nm)
• Sensitivity: -80 dBm (900 - 1600 nm), -70 dBm (400 - 900 nm)

Signal Analyzer

• A comprehensive response to your challenges: Fast and flexible EXA meets different needs with a single tool
• Cost-effective analysis for millimetre wave measurements
• Excellent level accuracy, DANL and TOI for small-signal measurements in large-signal conditions
• List-scan mode for fast discrete frequency point power measurements
• X-Series measurement application software simplifies measurements of: phase noise, noise figure, analogue demodulation, wireless communications and more

Signal Analyzer

• See more with a wide frequency range of 10 Hz to 44 GHz with up to 40 MHz analysis bandwidth
• Save test time in your spurious response measurements with the fast sweep capability
• Get the most cost-effective analysis for millimeter-wave measurements

General electronic instruments

- Power accuracy: ± (0.1% of reading + 0.05% of range)
- Bandwidth: DC, 0.1Hz ~ 100KHz
- Simultaneous measurement of all parameters

General electronic instruments

- Measurement accuracy: ± (0.1% of reading + 0.05% of range)
- Bandwidth: DC,0.5Hz-100KHz
- Voltage range: 15~1000V
- Current Wide Range: 0.25-5A
- Up to 50th harmonic measurement
- Three power measurement channels