Data Acquisition/Module

Oscilloscope

• One 90 GHz (standard)/120 GHz (optional) optical channel
• Jitter as low as 90 fs
• Ideal for analyzing 112 GBd (224 Gbps) optical signals or any application that require ultra• wide optical receiver > 65 GHz bandwidth (-3 dBo)
• Impulse response correction (Option IRC) is a standard feature and hardware filters for standards-based rates are optional
• Protect your investment: works with both the N1000A (250 kSa/s sampling rate) and 86100D (40 kSa/s sampling rate) mainframes

Optical Spectral Analyzer

• Spectral resolution as high as 2 GHz
• Wavelength accuracy as high as ± 0.0001 nm
• Optical rejection ratio > 40 dB
• Operation available from 375 nm to 12 μm

Optical Spectral Analyzer

• Wide wavelength range: 350 - 1750 nm
• High wavelength resolution: 0.05 nm (full wavelength range)
• High wavelength accuracy: ±0.05 nm (633/1523 nm), ±0.2 nm (350 - 1750 nm)
• Close-in dynamic range: 60 dB (λPK ±1 nm)
• Sensitivity: -80 dBm (900 - 1600 nm), -70 dBm (400 - 900 nm)

Signal Analyzer

• A comprehensive response to your challenges: Fast and flexible EXA meets different needs with a single tool
• Cost-effective analysis for millimetre wave measurements
• Excellent level accuracy, DANL and TOI for small-signal measurements in large-signal conditions
• List-scan mode for fast discrete frequency point power measurements
• X-Series measurement application software simplifies measurements of: phase noise, noise figure, analogue demodulation, wireless communications and more

Signal Analyzer

• See more with a wide frequency range of 10 Hz to 44 GHz with up to 40 MHz analysis bandwidth
• Save test time in your spurious response measurements with the fast sweep capability
• Get the most cost-effective analysis for millimeter-wave measurements

General electronic instruments

- Power accuracy: ± (0.1% of reading + 0.05% of range)
- Bandwidth: DC, 0.1Hz ~ 100KHz
- Simultaneous measurement of all parameters

General electronic instruments

- Measurement accuracy: ± (0.1% of reading + 0.05% of range)
- Bandwidth: DC,0.5Hz-100KHz
- Voltage range: 15~1000V
- Current Wide Range: 0.25-5A
- Up to 50th harmonic measurement
- Three power measurement channels

General electronic instruments

- High power accuracy: ± (0.1% of reading + 0.05% of range)
- 3 power measurement channels, can be flexibly selected according to the actual application scenario
- Bandwidth: DC, 0.5Hz-100KHz
- Maximum voltage measurement range 1500V, maximum current measurement range 50A