Anritsu MP2110A Sampling Oscilloscope Eye Chart Equipment Description
The MP2110A is an all-in-one measurement instrument that integrates a Bit Error Rate Tester (BERT) and a sampling oscilloscope, and is mainly used for Bit Error Rate (BER) measurements, eye diagram analysis, and other evaluation operations of optical modules. It supports inspection of optical modules from 10G to 800G during manufacturing.91522 The MP2110A has a built-in 4-channel sampling oscilloscope capable of performing high-speed sampling on two channels simultaneously at a sampling rate of up to 250,000 samples/second. It also supports NRZ signal mask edge measurement and jitter analysis, as well as analysis of PAM4 signals.
The MP2110A can measure bit rates from 24.3 Gbit/s to 28.2 Gbit/s in its standard configuration, and by installing the Option 093, its measurement range can be extended from 9.5 Gbit/s to 14.2 Gbit/s. The built-in sampling oscilloscope supports sampling rates of 40 GHz (electrical interface), 35 GHz (single-mode fibre, optical interface) and 25 GHz ( multimode fibre, optical interface) bandwidths.2 The device also features automatic wavemask margin testing and is capable of capturing one million samples of 25 Gbit/s signals in approximately five seconds, reducing eye diagram analysis time by approximately 65% compared to the previous generation of instruments.
To increase line efficiency and productivity, the BERTWave™ MP2110A combines BERT and sampling oscilloscope functionality, making it ideal for use on optical module and equipment production lines. In addition, the MP2110A offers low noise and multi-mode support, including the MP2110A-061 model added at factory shipment, which is not available through later modification.
The MP2110A is a powerful all-in-one measurement instrument for the production and quality control of high-speed optical modules, capable of meeting the needs of different rates from 10G to 800G.
What are the exact technical specifications of the MP2110A Bit Error Rate Tester (BERT) and Sampling Oscilloscope?
The specific technical specifications of the Anritsu MP2110A sampling oscilloscope include:
Supports all the performance required to measure optical devices in modules such as 100 GbE and OTU4, as well as optical modules.
Bandwidth optics: 35 GHz (SMF), 25 GHz (MMF).
Multi-channel BERT pulse pattern generator (PPG) jitter: 1 ps rms, built-in 1- to 4-channel 12.5 Gbit/s BERT error detector (ED), sensitivity: 10 mVp-p.
Sampling rate up to 250,000 samples/sec, capturing 1 million samples in about 5 seconds.
Built-in high sensitivity O/E (-15 dBm, typical, SMF).
Low jitter PPG: 600 fs (typical), high sensitivity ED.
With a sampling rate of 250,000 samples/second, 1 million samples can be captured in approximately 5 seconds. In addition, the automatic template margin function reduces the time required for template margin testing. These functions use a high-sensitivity O/E module that supports low noise values of 3.4 μW and -15 dBm (typical, SMF).
The MP2110A is an all-in-one measurement instrument with a built-in bit-error-rate tester (BERT) and sampling oscilloscope, supporting evaluation operations such as bit-error-rate (BER) measurements, eye diagram template testing, and eye diagram analysis of optical modules. This indicates that the BERTWave MP2110A is capable of performing advanced optical communication system evaluations, but further information is needed to obtain more detailed BERT specifications.
What are the application cases of MP2110A in optical module manufacturing process?
Application examples of the MP2110A in the optical module manufacturing process include the following:
Bit Error Rate Testing (BERT) and Eye Diagram Pattern Analysis: The MP2110A integrates BERT and sampling oscilloscopes in an all-in-one chassis designed specifically for 100 GbE/25 GbE optical module manufacturing applications. This integrated design not only improves optical module production efficiency, but also enables simultaneous BER measurements of up to 4 channels and performs eye diagram template testing and eye diagram analysis of up to 2 more channels on the Tx side.
Supports multiple network standards: The MP2110A supports inspection and analysis during the manufacturing process of optical modules from 10G to 800G, which demonstrates its ability to meet the needs of optical modules under different network standards.
Suitable for data centres and other application scenarios: The MP2110A's application cases include data centres and other scenarios that require high-speed, high-capacity network support. This is because it supports PAM4 optical signal output, which is a common form of signal used in fast, high-capacity networks.
Reducing Measurement Time: By supporting the ability to perform BER measurements on the Rx side of an optical module while simultaneously measuring the optical waveform on the Rx side, the MP2110A is able to significantly reduce the measurement time of multi-channel optical modules by up to 65%.
Adding New Features to Enhance Test Performance: To further enhance optical module test performance, Anritsu has added new features to the MP2110A sampling oscilloscope that complete the integrated support for all current IEEE standards.
The MP2110A's use cases in the optical module manufacturing process cover BER testing, eye diagram pattern analysis, support for multiple network standards, applicability to high-speed, high-capacity network scenarios such as data centres, and the enhancement of test performance through the addition of new features.
How to operate the NRZ signal mask edge measurement and jitter analysis functions supported by MP2110A?
To operate the NRZ signal mask edge measurement and jitter analysis functions supported by the MP2110A, it is first necessary to understand that the device is an all-in-one measurement instrument that integrates a bit error rate tester (BERT) and a sampling oscilloscope. It is capable of performing evaluation operations such as bit error rate (BER) measurement and eye diagram analysis of optical modules. For mask edge measurement of NRZ signals, although the direct operation details are not explicitly stated in the information I searched for, considering the design purpose and functions of the BERTWave MP2110A, it can be deduced that this function may be realised through its built-in Bit Error Rate Tester (BERT), which can be set up and adjusted by the user through the operator's manual or the relevant software interface.
As for the jitter analysis function, according to the evidence, the BERTWave MP2110A works in conjunction with the MX210001A jitter analysis software to enable simultaneous jitter analysis, eye diagram and eye diagram template measurements. This suggests that users need to download and install the appropriate software, through which jitter analysis can then be set up and executed. In addition, the device supports sampling speeds of up to 150k samples/second, which helps to utilise measurement time more efficiently.
To operate the MP2110A for mask edge measurements and jitter analysis of NRZ signals, the user will need to refer to the operation manual and may need to use specific software such as the MX210001A Jitter Analysis Software55 for advanced setup and analysis. These operational details should be found in the operation manual or in the software's help documentation for specific instructions.
What are the unique advantages of the MP2110A over other similar products?
The MP2110A has the following unique advantages over other similar products:
High optical interface sensitivity: With an optical interface sensitivity of up to -15 dBm (typical, SMF), the MP2110A is able to capture measurements of low-noise eye diagrams of signals that have been attenuated by optical switches, etc., which helps to improve production line throughput.
Dramatic reduction in measurement time: The BERTWave MP2110A is capable of reducing measurement time by up to 65%. It supports bit rate measurements from 24.3 Gbit/s to 28.2 Gbit/s in the standard configuration and from 9.5 Gbit/s to 14.2 Gbit/s by installing Option 093.
Simultaneous Measurement of Multiple Signal Channels: The MP2110A is capable of measuring multiple signal channels at the same time, which not only improves test efficiency and accuracy, but also reduces test cost and time.
Integrated BERT and Oscilloscope Functions: The MP2110A integrates the functions of a Bit Error Rate Tester (BERT) and a sampling oscilloscope, which reduces the number of instruments and equipment, saves space and costs, and simplifies the connection and operation process.
Supports Multiple Wavelength Test Ranges: The MP2110A's features of high resolution up to 5pm, accurate wavelength accuracy up to 5pm, and a wide wavelength test range of 350-5500nm make it easy for engineers to improve test efficiency.
All-in-One Measurement Instrument: The MP2110A is an all-in-one measurement instrument with a built-in BER tester and sampling oscilloscope. This all-in-one test solution is very rare in the industry, and it is mainly used to support the 100G optical modules, which are very popular in the market.
The MP2110A's unique advantages are its high optical interface sensitivity, significantly shorter measurement time, ability to measure multiple signal channels simultaneously, integrated BERT and oscilloscope functionality, support for a wide range of wavelengths, and features as an all-in-one measurement instrument. Together, these advantages make the MP2110A stand out from its competitors.
The MP2110A is an all-in-one measurement instrument that integrates a Bit Error Rate Tester (BERT) and a sampling oscilloscope, and is mainly used for Bit Error Rate (BER) measurements, eye diagram analysis, and other evaluation operations of optical modules. It supports inspection of optical modules from 10G to 800G during manufacturing.91522 The MP2110A has a built-in 4-channel sampling oscilloscope capable of performing high-speed sampling on two channels simultaneously at a sampling rate of up to 250,000 samples/second. It also supports NRZ signal mask edge measurement and jitter analysis, as well as analysis of PAM4 signals.
The MP2110A can measure bit rates from 24.3 Gbit/s to 28.2 Gbit/s in its standard configuration, and by installing the Option 093, its measurement range can be extended from 9.5 Gbit/s to 14.2 Gbit/s. The built-in sampling oscilloscope supports sampling rates of 40 GHz (electrical interface), 35 GHz (single-mode fibre, optical interface) and 25 GHz ( multimode fibre, optical interface) bandwidths.2 The device also features automatic wavemask margin testing and is capable of capturing one million samples of 25 Gbit/s signals in approximately five seconds, reducing eye diagram analysis time by approximately 65% compared to the previous generation of instruments.
To increase line efficiency and productivity, the BERTWave™ MP2110A combines BERT and sampling oscilloscope functionality, making it ideal for use on optical module and equipment production lines. In addition, the MP2110A offers low noise and multi-mode support, including the MP2110A-061 model added at factory shipment, which is not available through later modification.
The MP2110A is a powerful all-in-one measurement instrument for the production and quality control of high-speed optical modules, capable of meeting the needs of different rates from 10G to 800G.
What are the exact technical specifications of the MP2110A Bit Error Rate Tester (BERT) and Sampling Oscilloscope?
The specific technical specifications of the Anritsu MP2110A sampling oscilloscope include:
Supports all the performance required to measure optical devices in modules such as 100 GbE and OTU4, as well as optical modules.
Bandwidth optics: 35 GHz (SMF), 25 GHz (MMF).
Multi-channel BERT pulse pattern generator (PPG) jitter: 1 ps rms, built-in 1- to 4-channel 12.5 Gbit/s BERT error detector (ED), sensitivity: 10 mVp-p.
Sampling rate up to 250,000 samples/sec, capturing 1 million samples in about 5 seconds.
Built-in high sensitivity O/E (-15 dBm, typical, SMF).
Low jitter PPG: 600 fs (typical), high sensitivity ED.
With a sampling rate of 250,000 samples/second, 1 million samples can be captured in approximately 5 seconds. In addition, the automatic template margin function reduces the time required for template margin testing. These functions use a high-sensitivity O/E module that supports low noise values of 3.4 μW and -15 dBm (typical, SMF).
The MP2110A is an all-in-one measurement instrument with a built-in bit-error-rate tester (BERT) and sampling oscilloscope, supporting evaluation operations such as bit-error-rate (BER) measurements, eye diagram template testing, and eye diagram analysis of optical modules. This indicates that the BERTWave MP2110A is capable of performing advanced optical communication system evaluations, but further information is needed to obtain more detailed BERT specifications.
What are the application cases of MP2110A in optical module manufacturing process?
Application examples of the MP2110A in the optical module manufacturing process include the following:
Bit Error Rate Testing (BERT) and Eye Diagram Pattern Analysis: The MP2110A integrates BERT and sampling oscilloscopes in an all-in-one chassis designed specifically for 100 GbE/25 GbE optical module manufacturing applications. This integrated design not only improves optical module production efficiency, but also enables simultaneous BER measurements of up to 4 channels and performs eye diagram template testing and eye diagram analysis of up to 2 more channels on the Tx side.
Supports multiple network standards: The MP2110A supports inspection and analysis during the manufacturing process of optical modules from 10G to 800G, which demonstrates its ability to meet the needs of optical modules under different network standards.
Suitable for data centres and other application scenarios: The MP2110A's application cases include data centres and other scenarios that require high-speed, high-capacity network support. This is because it supports PAM4 optical signal output, which is a common form of signal used in fast, high-capacity networks.
Reducing Measurement Time: By supporting the ability to perform BER measurements on the Rx side of an optical module while simultaneously measuring the optical waveform on the Rx side, the MP2110A is able to significantly reduce the measurement time of multi-channel optical modules by up to 65%.
Adding New Features to Enhance Test Performance: To further enhance optical module test performance, Anritsu has added new features to the MP2110A sampling oscilloscope that complete the integrated support for all current IEEE standards.
The MP2110A's use cases in the optical module manufacturing process cover BER testing, eye diagram pattern analysis, support for multiple network standards, applicability to high-speed, high-capacity network scenarios such as data centres, and the enhancement of test performance through the addition of new features.
How to operate the NRZ signal mask edge measurement and jitter analysis functions supported by MP2110A?
To operate the NRZ signal mask edge measurement and jitter analysis functions supported by the MP2110A, it is first necessary to understand that the device is an all-in-one measurement instrument that integrates a bit error rate tester (BERT) and a sampling oscilloscope. It is capable of performing evaluation operations such as bit error rate (BER) measurement and eye diagram analysis of optical modules. For mask edge measurement of NRZ signals, although the direct operation details are not explicitly stated in the information I searched for, considering the design purpose and functions of the BERTWave MP2110A, it can be deduced that this function may be realised through its built-in Bit Error Rate Tester (BERT), which can be set up and adjusted by the user through the operator's manual or the relevant software interface.
As for the jitter analysis function, according to the evidence, the BERTWave MP2110A works in conjunction with the MX210001A jitter analysis software to enable simultaneous jitter analysis, eye diagram and eye diagram template measurements. This suggests that users need to download and install the appropriate software, through which jitter analysis can then be set up and executed. In addition, the device supports sampling speeds of up to 150k samples/second, which helps to utilise measurement time more efficiently.
To operate the MP2110A for mask edge measurements and jitter analysis of NRZ signals, the user will need to refer to the operation manual and may need to use specific software such as the MX210001A Jitter Analysis Software55 for advanced setup and analysis. These operational details should be found in the operation manual or in the software's help documentation for specific instructions.
What are the unique advantages of the MP2110A over other similar products?
The MP2110A has the following unique advantages over other similar products:
High optical interface sensitivity: With an optical interface sensitivity of up to -15 dBm (typical, SMF), the MP2110A is able to capture measurements of low-noise eye diagrams of signals that have been attenuated by optical switches, etc., which helps to improve production line throughput.
Dramatic reduction in measurement time: The BERTWave MP2110A is capable of reducing measurement time by up to 65%. It supports bit rate measurements from 24.3 Gbit/s to 28.2 Gbit/s in the standard configuration and from 9.5 Gbit/s to 14.2 Gbit/s by installing Option 093.
Simultaneous Measurement of Multiple Signal Channels: The MP2110A is capable of measuring multiple signal channels at the same time, which not only improves test efficiency and accuracy, but also reduces test cost and time.
Integrated BERT and Oscilloscope Functions: The MP2110A integrates the functions of a Bit Error Rate Tester (BERT) and a sampling oscilloscope, which reduces the number of instruments and equipment, saves space and costs, and simplifies the connection and operation process.
Supports Multiple Wavelength Test Ranges: The MP2110A's features of high resolution up to 5pm, accurate wavelength accuracy up to 5pm, and a wide wavelength test range of 350-5500nm make it easy for engineers to improve test efficiency.
All-in-One Measurement Instrument: The MP2110A is an all-in-one measurement instrument with a built-in BER tester and sampling oscilloscope. This all-in-one test solution is very rare in the industry, and it is mainly used to support the 100G optical modules, which are very popular in the market.
The MP2110A's unique advantages are its high optical interface sensitivity, significantly shorter measurement time, ability to measure multiple signal channels simultaneously, integrated BERT and oscilloscope functionality, support for a wide range of wavelengths, and features as an all-in-one measurement instrument. Together, these advantages make the MP2110A stand out from its competitors.