How to choose an eye diagram template for keysight FlexDCA software? keysight FlexDCA Software
FlexDCA software runs on the YesTech Digital Communications Analyzer (DCA) family of sampling oscilloscopes (also known as equivalent time oscilloscopes). The DCA helps you display and analyze the analog properties of high-speed signals such as those used in wireline communications and data center links.FlexDCA is installed by the manufacturer on the DCA-X mainframe, or it can be installed on a computer to control the DCA-M or remotely control the DCA-X.
Double-click on "FlexDCA" to open the FlexDCA software.
If the mouse is in the other tab, switch to the "Mask Test" menu, look for the "Add Mask Test" menu and click on it.
Open the "Open Mask File for Mask 5" dialog box and select the eye template.
Note: For different application scenarios, you can select the corresponding template. (There are many different types of eye chart templates under the Masks file.)
4.选择模板，点击“open”,返回界面这时候并没有运行，无法正常查看数据。
5.在“Mask Test”菜单，找“Mask Test Margins for Mask 5”菜单并点击，弹出对话框。
6.勾选“Mask Test Margins On”，Margin Type选择“AUTO”, Auto Mask Margin Settings选择“Hit Ratio”，如上图所示。关闭对话框即可
注意：
1.勾选“Mask Test Margins On”，为了打开测试开关。
2.Margin Type中“AUTO”自动模式，Manual手动模式
3.Auto Margin Specification Type类型有两种：
Hit Count：严格模式，不允许眼图在Margin阴影有散点。
Hit Ratio：宽松模式，眼图允许部分散点会落在Margin阴影处。
7.清除数据，重新渲染数据，可以点击“Clear”按钮。然后单击“RUN”按钮
8.界面下方有两块白色区域，可查看具体的眼图测试数据。
注意：如果没有想要的眼图参数，可自定义编辑显示，下期来说哈
FlexDCA software runs on the YesTech Digital Communications Analyzer (DCA) family of sampling oscilloscopes (also known as equivalent time oscilloscopes). The DCA helps you display and analyze the analog properties of high-speed signals such as those used in wireline communications and data center links.FlexDCA is installed by the manufacturer on the DCA-X mainframe, or it can be installed on a computer to control the DCA-M or remotely control the DCA-X.
Double-click on "FlexDCA" to open the FlexDCA software.
If the mouse is in the other tab, switch to the "Mask Test" menu, look for the "Add Mask Test" menu and click on it.
Open the "Open Mask File for Mask 5" dialog box and select the eye template.
Note: For different application scenarios, you can select the corresponding template. (There are many different types of eye chart templates under the Masks file.)
4.选择模板，点击“open”,返回界面这时候并没有运行，无法正常查看数据。
5.在“Mask Test”菜单，找“Mask Test Margins for Mask 5”菜单并点击，弹出对话框。
6.勾选“Mask Test Margins On”，Margin Type选择“AUTO”, Auto Mask Margin Settings选择“Hit Ratio”，如上图所示。关闭对话框即可
注意：
1.勾选“Mask Test Margins On”，为了打开测试开关。
2.Margin Type中“AUTO”自动模式，Manual手动模式
3.Auto Margin Specification Type类型有两种：
Hit Count：严格模式，不允许眼图在Margin阴影有散点。
Hit Ratio：宽松模式，眼图允许部分散点会落在Margin阴影处。
7.清除数据，重新渲染数据，可以点击“Clear”按钮。然后单击“RUN”按钮
8.界面下方有两块白色区域，可查看具体的眼图测试数据。
注意：如果没有想要的眼图参数，可自定义编辑显示，下期来说哈