Signal testing solutions for rapidly expanding data traffic on mobile terminals
To meet the rapidly expanding data traffic in today's world of smartphones and mobile devices, data centre network interfaces are moving to the faster 200 GbE, 400 GbE and 800 GbE standards. In the context of this industry application, communication equipment interconnections have begun to adopt not only PCI Express Gen5, which supports faster speeds of up to 32 Gbit/s, but also multichannel technology.
Anritsu has introduced the MP1900A Series Signal Quality Analyser-R, a high-performance BERT with eight module slots that extends measurement applications with PPG/ED and jitter/noise generators to support faster devices for signal integrity analysis. In addition to physical layer measurements for broadband network interfaces, the all-in-one MP1900A also supports measurements for interfaces such as the PCI Express bus.
MP1900A supports applications: 100 GbE / 200 GbE / 400 GbE / 800 GbE, CEI-25G / 28G / 56G / 112G, InfiniBand EDR / HDR, Fibre Channel, PCI Express Gen1 / 2/3/4/5, Thunderbolt 1/2/3, USB3 . / 4 Type C, SAS-3 / -4, DP1.4, Optical Module, SERDES, AOC, High Speed Interconnect.
The Signal Quality Analyzer-R MP1900A from Anritsu offers two test solutions, the PAM4 test solution and the high-speed serial bus interface test solution (PCI Express, USB, Thunderbolt).
PAM4 Test Solution
Maximum transfer capacity of 512 Gbit/s
PAM4 PPG/ED (MU196020A/MU196040A)
Baud rate of 2.4 to 64.2 Gbaud*1
Multi-channel scalability 4ch PAM4/NRZ NEW
High speed Tr/Tf 8.5 ps (20 - 80%)
Low residual jitter data output 170 fs rms (typical)
High quality data output, low noise, low distortion
4-tap emphasis (variable range 20 dB)
ISI adjustment function NEW
FEC pattern generation function NEW
Stressed margin BER < E-12*2
Internal Clock Recovery
PAM 4 Pattern Editor, Symbol Error Measurement
Jitter, Sample Strength Measurement Function (SJ / RJ / BUJ / SSC)
Voltage noise add-on function (Common/Differential/White Noise)
Jitter Tolerance Measurement with DUT BER Counter Function NEW
High Speed Serial Bus Interface Test Solution (PCI Express, USB, Thunderbolt)
Transfer capacity up to 512 Gbit/s, expandable up to 16ch in one main frame (with eight 32 Gbit/s 2ch PPG slots)
Integrated support for high-speed networks, bus interfaces such as PCIe or bi-directional testing
New broadband 32 Gbit/s SI PPG/ED (MU195020A/MU195040A)
Bit rates 2.4 Gbit/s to 32.1 Gbit/s
NRZ/PAM4 support
10th order weighting
Variable ISI function
Multi-band CTLE (8 Gbit/s, 16 Gbit/s, 28 Gbit/s bandwidth)
Internal jitter output for random jitter down to 115 fs rms (typical)
High sensitivity data inputs up to 15 mV typical (eye height)
Optional 1ch/2ch
PCI Express link training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL021)
USB link training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL022)
Jitter addition and measurement jitter tolerance function (SJ/RJ/BUJ/SSC, using MU181500B/MX183000A-PL001)
Voltage noise increase function (normal, differential, white noise, using MU195020A/MU195050A)
To meet the rapidly expanding data traffic in today's world of smartphones and mobile devices, data centre network interfaces are moving to the faster 200 GbE, 400 GbE and 800 GbE standards. In the context of this industry application, communication equipment interconnections have begun to adopt not only PCI Express Gen5, which supports faster speeds of up to 32 Gbit/s, but also multichannel technology.
Anritsu has introduced the MP1900A Series Signal Quality Analyser-R, a high-performance BERT with eight module slots that extends measurement applications with PPG/ED and jitter/noise generators to support faster devices for signal integrity analysis. In addition to physical layer measurements for broadband network interfaces, the all-in-one MP1900A also supports measurements for interfaces such as the PCI Express bus.
MP1900A supports applications: 100 GbE / 200 GbE / 400 GbE / 800 GbE, CEI-25G / 28G / 56G / 112G, InfiniBand EDR / HDR, Fibre Channel, PCI Express Gen1 / 2/3/4/5, Thunderbolt 1/2/3, USB3 . / 4 Type C, SAS-3 / -4, DP1.4, Optical Module, SERDES, AOC, High Speed Interconnect.
The Signal Quality Analyzer-R MP1900A from Anritsu offers two test solutions, the PAM4 test solution and the high-speed serial bus interface test solution (PCI Express, USB, Thunderbolt).
PAM4 Test Solution
Maximum transfer capacity of 512 Gbit/s
PAM4 PPG/ED (MU196020A/MU196040A)
Baud rate of 2.4 to 64.2 Gbaud*1
Multi-channel scalability 4ch PAM4/NRZ NEW
High speed Tr/Tf 8.5 ps (20 - 80%)
Low residual jitter data output 170 fs rms (typical)
High quality data output, low noise, low distortion
4-tap emphasis (variable range 20 dB)
ISI adjustment function NEW
FEC pattern generation function NEW
Stressed margin BER < E-12*2
Internal Clock Recovery
PAM 4 Pattern Editor, Symbol Error Measurement
Jitter, Sample Strength Measurement Function (SJ / RJ / BUJ / SSC)
Voltage noise add-on function (Common/Differential/White Noise)
Jitter Tolerance Measurement with DUT BER Counter Function NEW
High Speed Serial Bus Interface Test Solution (PCI Express, USB, Thunderbolt)
Transfer capacity up to 512 Gbit/s, expandable up to 16ch in one main frame (with eight 32 Gbit/s 2ch PPG slots)
Integrated support for high-speed networks, bus interfaces such as PCIe or bi-directional testing
New broadband 32 Gbit/s SI PPG/ED (MU195020A/MU195040A)
Bit rates 2.4 Gbit/s to 32.1 Gbit/s
NRZ/PAM4 support
10th order weighting
Variable ISI function
Multi-band CTLE (8 Gbit/s, 16 Gbit/s, 28 Gbit/s bandwidth)
Internal jitter output for random jitter down to 115 fs rms (typical)
High sensitivity data inputs up to 15 mV typical (eye height)
Optional 1ch/2ch
PCI Express link training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL021)
USB link training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL022)
Jitter addition and measurement jitter tolerance function (SJ/RJ/BUJ/SSC, using MU181500B/MX183000A-PL001)
Voltage noise increase function (normal, differential, white noise, using MU195020A/MU195050A)