N1092D keysight 28/45 GHz (four optical channels) DCA-M sampling oscilloscope
The Keysight N1092D is a DCA-M sampling oscilloscope with one optical channel and two electrical channels. The highly accurate, low-cost optical/electrical waveform analysis solution includes solutions that provide 8.4 to 64 Gbaud, very low noise and jitter, and fast sampling rates for high throughput.
Model: N1092D
Name: DCA-M sampling oscilloscope
Brand：KEYSIGHT
Category: General electronic test > DCA-M sampling oscilloscope
Product attributes: Host
Functionality
High sensitivity with < 5 µW noise
Ultra-fast throughput with sampling rates up to 250 kHz
Accurate high-speed data analysis with jitter < 200 fs
Compact design with smaller form factor
Unfiltered bandwidth > 40 GHz (option 40A)
Connect N1092A/B/C/D/E method
Method 1. Connect directly to the PC of N1092A/B/C/D/E with USB cable.
Connect 86100D or N1000A host PC to N1092A/B/C/D/E with USB cable.(The host PC can be controlled by GPIB or other ways. (The host computer can be controlled by GPIB or LAN).
Method 2. The simplest and best method for an automated test system environment is to control
For an automated test system environment, the simplest and preferred method of controlling the N1092A/B/C/D/E is to connect the primary test system PC to a low cost modern PC via LAN. the FlexDCA interface is located on a second PC.
The second PC is then connected to the N1092A/B/C/D/E via USB. Connection via USB. This eliminates most of the compatibility problems between existing test system PCs and the N1092A/B/C/D/E. Most of the compatibility problems between the N1092A/B/C/D/E hardware and can greatly simplify the conversion of the 86100D system to the N1092A/B/C/D/E system
The keysight N1000 and 86100 Digital Communications Analyzer (DCA) series is considered the industry standard for verifying that optical transmitters are compliant with communications standards. For years, engineers have relied on the DCA to provide accurate and simple measurements of digital communication waveforms. This Keysight N1092A/B/C/D/E DCA-M builds on this tradition by using the high-performance elements of the N1000 and 86100 oscilloscope hosts, as well as the optical and electrical channel acquisition systems. acquisition system as well as the optical and electrical channel hardware of the 861XX and N104X plug-in modules.
N104X plug-in module. The small form factor is ideal for manufacturing and R&D applications, and unlike the 86100D and N1000A, they use modules to create a waveform analysis system. Unlike the 86100D and N1000A, the N109X is a fully integrated instrument that has a small form factor. The low-noise, high-sensitivity calibrated optical reference receiver - with industry-standard tolerances - can be used for both multimode and single-mode. Create a measurement system with very high dynamic range. Electrical channels are available with 30 GHz and 50 GHz bandwidths.
The Keysight N1092D is a DCA-M sampling oscilloscope with one optical channel and two electrical channels. The highly accurate, low-cost optical/electrical waveform analysis solution includes solutions that provide 8.4 to 64 Gbaud, very low noise and jitter, and fast sampling rates for high throughput.
Model: N1092D
Name: DCA-M sampling oscilloscope
Brand：KEYSIGHT
Category: General electronic test > DCA-M sampling oscilloscope
Product attributes: Host
Functionality
High sensitivity with < 5 µW noise
Ultra-fast throughput with sampling rates up to 250 kHz
Accurate high-speed data analysis with jitter < 200 fs
Compact design with smaller form factor
Unfiltered bandwidth > 40 GHz (option 40A)
Connect N1092A/B/C/D/E method
Method 1. Connect directly to the PC of N1092A/B/C/D/E with USB cable.
Connect 86100D or N1000A host PC to N1092A/B/C/D/E with USB cable.(The host PC can be controlled by GPIB or other ways. (The host computer can be controlled by GPIB or LAN).
Method 2. The simplest and best method for an automated test system environment is to control
For an automated test system environment, the simplest and preferred method of controlling the N1092A/B/C/D/E is to connect the primary test system PC to a low cost modern PC via LAN. the FlexDCA interface is located on a second PC.
The second PC is then connected to the N1092A/B/C/D/E via USB. Connection via USB. This eliminates most of the compatibility problems between existing test system PCs and the N1092A/B/C/D/E. Most of the compatibility problems between the N1092A/B/C/D/E hardware and can greatly simplify the conversion of the 86100D system to the N1092A/B/C/D/E system
The keysight N1000 and 86100 Digital Communications Analyzer (DCA) series is considered the industry standard for verifying that optical transmitters are compliant with communications standards. For years, engineers have relied on the DCA to provide accurate and simple measurements of digital communication waveforms. This Keysight N1092A/B/C/D/E DCA-M builds on this tradition by using the high-performance elements of the N1000 and 86100 oscilloscope hosts, as well as the optical and electrical channel acquisition systems. acquisition system as well as the optical and electrical channel hardware of the 861XX and N104X plug-in modules.
N104X plug-in module. The small form factor is ideal for manufacturing and R&D applications, and unlike the 86100D and N1000A, they use modules to create a waveform analysis system. Unlike the 86100D and N1000A, the N109X is a fully integrated instrument that has a small form factor. The low-noise, high-sensitivity calibrated optical reference receiver - with industry-standard tolerances - can be used for both multimode and single-mode. Create a measurement system with very high dynamic range. Electrical channels are available with 30 GHz and 50 GHz bandwidths.