Tunable Laser System Source

• Wavelength range: 1480-1640 nm (C+L band coverage)
• Output power: Up to +13 dBm
• Power stability: < ±0.01 dB (over 8 hours)
• Spectral linewidth: < 100 kHz (typical)
• Wavelength accuracy: ±1 pm (calibrated)
• Tuning step size: Minimum 1 pm

Tunable Laser System Source

• Covers 1480-1640 nm (C+L band), resolution 0.1 pm
• Supports ITU-T DWDM standard channels (50 GHz/100 GHz spacing)
• Expandable to 1260-1650 nm (optional O/E/S band module)
•Compatible with Keysight 816x series mainframe
•Communication interfaces:
•Standard: GPIB/USB
•Optional: LAN (LXI-C class)
•Supports SCPI/Python/LabVIEW control

Tunable Laser System Source

• ​​Wavelength Range:​​ 700~1700nm (covers O/E/S/C/L bands)
• ​Dynamic Range:​​ +3dBm to -90dBm with 0.001dB resolution
• ​​Calibration Accuracy:​​ ±0.02dB (supports user-defined calibration)
• ​​Sampling Rate:​​ 10μs high-speed sampling for transient power fluctuation capture
• ​​Data Analysis:​​ Built-in trend chart/histogram with BER estimation capability
• ​​Automation:​​ Compatible with Keysight mainframe architecture, SCPI command control supported
• ​​Long-term Stability:​​ <0.01dB power fluctuation (ideal for aging tests)
• ​​Noise Performance:​​ Low-noise design ensures accurate weak signal measurement

Tunable Laser System Source

• Application areas: optical communication testing, DWDM, coherent communication, fiber optic sensing, device characterization
• Wavelength range: 1480~1640nm (expandable), ±0.2pm high accuracy
• Spectral characteristics: ultra-narrow linewidth (<100kHz), low RIN noise (<-155dB/Hz)
• Output modes: supports CW continuous wave and modulated laser outputs
• Stability: power fluctuation <0.01dB, suitable for long-term testing
• System Integration: compatible with Agilent host architecture, support for automation control
• Typical use: optical device testing, system verification, laboratory research and development

Oscilloscope

Tektronix 80C07B High Frequency Oscilloscope Probe - Designed for accurate measurement, 500MHz bandwidth, 10X attenuation ratio, compatible with mainstream TDS series oscilloscopes. Original quality, to ensure signal integrity, suitable for electronic research and development, circuit debugging and high-speed signal analysis, is a reliable test partner for engineers' labs.

Oscilloscope

The 80C11B module is a wide-wavelength (1100 - 1650 nm), multirate optical interface sampling module optimized for testing 10 Gb/s datacom and telecom standard rates of 9.953, 10.3125, 10.51875, 10.664, 10.709, 11.0957, 11.317 Gb/s, 12.50, and 14.025 Gb/s. modules. With a high optical bandwidth of up to 30 GHz (typical), it is particularly well suited for general-purpose, high-performance 10 Gb/s optical device testing.

Oscilloscope

The N1046A Remote Sampling Head is a module for use with the N1000A DCA-X mainframe. Like all DCA modules from Isotek, the N1046A offers a wide range of configuration and performance options to fit your oscilloscope solution, whether it's bandwidth, channel count, or features.
• 75, 85, or >100 GHz maximum bandwidth (upgradeable)
• 1, 2 or 4 channels per module (user selectable)
• Large bandwidth and low-noise sampler for analyzing 224 Gb/s high-speed signals
• Electrical input: 1 mm negative (1.0 negative to 1.85 negative adapter included), 250 kSa/s sampling rate

Oscilloscope

• One 65 GHz optical channel
• Optional electrical channels with selectable bandwidth settings (33/40/50/70/85/95 GHz)
• Ultra-low jitter down to 90 fs
• Supports analysis of optical signals >53 GBd and 112 GBd (224 Gbps) TDECQ
• Pulse response correction available on all channels (optical and electrical)
• Future-proof investment: Compatible with N1000A (250 kSa/s sampling rate) and 86100D (40 kSa/s sampling rate) mainframes

Power Meter