Network Analyzer

• System frequency range: 10 MHz to 110 GHz
• Dynamic range up to 130 dB (typical)
• Two test ports, 1.0 mm positive
• R&S®ZVA67 base unit can be used as a stand-alone unit

Network Analyzer

• 10 MHz to 26.5/43.5/50/67 GHz (R&S®ZNA26/43/50/67);
• Available in dual- or quad-port models
• Outstanding RF performance
• Up to four integrated signal sources
• Unique and intuitive touch-only operation

Network Analyzer

• Frequency range from 9 kHz to 43.5 GHz
• Two or four ports
• Wide dynamic range up to 140 dB
• Short scan time, 401 points in 4 ms
• Wide power sweep range of 98 dB

Network Analyzer

• Perform S-parameter measurements with ultra-low uncertainty and ultra-high stability.
• Simplify setup and efficiently characterise active components with application software.
• Multi-touch screens and an intuitive user interface help you accelerate insight into component characterisation.

EMI Test Receiver

• Frequency range: 1 Hz to 8 GHz, 26.5 GHz or 44 GHz
• Complies with CISPR 16-1-1, ANSI C63.2, MIL-STD-461 and FCC standards
• Outstanding dynamic range and accuracy

Network Analyzer

• Frequency range from 9 kHz to 43.5 GHz
• Two or four ports
• Wide dynamic range up to 140 dB
• Short scan time, 401 points in 4 ms
• Wide power sweep range of 98 dB

Network Analyzer

• Frequency range: 9 kHz to 8.5 GHz, or 100 kHz to 20/26.5/40 GHz
• Up to 24 ports with full phase reference receivers
• Up to 140 dB dynamic range
• Scan times as short as 1.7 ms (R&S®ZNBT8) and 2.7 ms

Network Analyzer

• 3671C/D/E/G Vector Network Analyser
• Wider frequency coverage with starting frequencies down to 100kHz

Network Analyzer

• 500Hz~110GHz wideband coaxial coverage
• 30MHz IF bandwidth, 200001 measurement points
• Ultra-fast scanning speed, 140dB dynamic range
• Simultaneous recording of SCPI commands, one-key script generation
• 15.6-inch multi-parameter display, multi-touch operation