keithley 2612a: a high-performance dual-channel system digital source meter
If you are an engineer engaged in electronic testing, device analysis or research and development, you may often encounter such a need: the need for different types of devices to carry out precision voltage and current source measurements, and at the same time require fast test speed, accurate data, instrument flexibility. So, have you heard of keithley 2612a this instrument? It is a dual-channel system digital source meter, which can be used as a desktop-level I-V characterization tool or as an integral part of a multi-channel I-V test system.
It has the following key features and benefits:
- The following functions can be combined in one compact unit: precision voltage source, high accuracy current source, digital multi-meter, arbitrary waveform generator, voltage or current pulse generator, electronic load, and trigger controller.
- Code is backward compatible with 2600 series digital source meters for easy replacement.
- An embedded TSP® Express software tool is provided, allowing users to quickly and easily perform commonly used I-V tests without programming or installing software.
- Precision timing and channel synchronization (<500ns) are available to support parallel testing for unmatched throughput.
- Read speeds up to 20,000 reads/sec provide faster test times and the ability to capture device transient performance.
- Offers wide dynamic range: 1fA~10A and 1µV~200V.
- Supports TSP-Link® bus for channel expansion of up to 32 units/64 channels via GPIB or IP address.
- Features USB port for saving data and test scripts.
- Conforms to LXI Class C standards, providing high-speed data transfer and enabling fast remote testing, monitoring, and troubleshooting.
keithley 2612a product introduction
The keithley 2612a is a two-channel system digital source meter, each channel can be independently configured as a precision voltage source, a high-precision current source, or a digital multi-meter. Each channel can output signals up to 200V or 10A pulses (1.5A DC) and can measure signals down to 1fA or 1µV. Each channel has its own display and keypad for easy single channel operation. At the same time, the two channels can also be operated synchronously via the internal bus or external triggering for complex two-channel testing.
The keithley 2612a also features powerful waveform generation and measurement functions. It can generate arbitrary waveforms, square waveforms, triangular waveforms, sawtooth waveforms and other commonly used waveforms, and you can set the waveform parameters such as amplitude, frequency, bias and so on. It can also generate voltage or current pulses and set pulse parameters such as width, duty cycle, delay, etc. It can also be used as an electronic load. It can also be used as an electronic load to absorb or amplify external signals, and load parameters such as resistance, capacitance, inductance, etc. can be set. It can also measure the input signal and display the measurement results such as voltage, current, power, resistance, capacitance, inductance, etc. It can also perform statistics on the measurement results. It can also analyze the measurement results statistically, such as the maximum value, minimum value, average value, standard deviation and so on.
The eithley 2612a also has flexible programming and control features. It has a built-in Test Script Processor (TSP®) that allows complete test programs (scripts) to be executed in the instrument without the need for an external controller. It also provides an embedded TSP® Express software tool that allows users to quickly and easily perform commonly used I-V tests without programming or installing software. It also supports a variety of communication interfaces, such as GPIB, USB, and LAN, allowing remote control and data transfer in different ways. It is also LXI Class C compliant, providing high-speed data transfer and enabling fast remote testing, monitoring and troubleshooting.
keithley 2612a product applications
The keithley 2612a is a high-performance instrument for a wide range of I-V source measurement applications that meet your needs for accuracy, speed, and flexibility. It can be used in the following areas:
- Semiconductor device testing: such as diodes, transistors, MOSFETs, LEDs, etc.
- Optoelectronic device testing: such as photodiodes, laser diodes, solar cells, etc.
- Sensor testing: such as temperature sensors, pressure sensors, humidity sensors, etc.
- Battery testing: such as lithium-ion batteries, nickel-metal hydride batteries, lead-acid batteries, etc.
- Material testing: such as conductive materials, magnetic materials, piezoelectric materials, etc.
- Teaching experiments: such as basic circuit experiments, digital logic experiments, analog circuit experiments, etc.
If you are an engineer engaged in electronic testing, device analysis or research and development, you may often encounter such a need: the need for different types of devices to carry out precision voltage and current source measurements, and at the same time require fast test speed, accurate data, instrument flexibility. So, have you heard of keithley 2612a this instrument? It is a dual-channel system digital source meter, which can be used as a desktop-level I-V characterization tool or as an integral part of a multi-channel I-V test system.
It has the following key features and benefits:
- The following functions can be combined in one compact unit: precision voltage source, high accuracy current source, digital multi-meter, arbitrary waveform generator, voltage or current pulse generator, electronic load, and trigger controller.
- Code is backward compatible with 2600 series digital source meters for easy replacement.
- An embedded TSP® Express software tool is provided, allowing users to quickly and easily perform commonly used I-V tests without programming or installing software.
- Precision timing and channel synchronization (<500ns) are available to support parallel testing for unmatched throughput.
- Read speeds up to 20,000 reads/sec provide faster test times and the ability to capture device transient performance.
- Offers wide dynamic range: 1fA~10A and 1µV~200V.
- Supports TSP-Link® bus for channel expansion of up to 32 units/64 channels via GPIB or IP address.
- Features USB port for saving data and test scripts.
- Conforms to LXI Class C standards, providing high-speed data transfer and enabling fast remote testing, monitoring, and troubleshooting.
keithley 2612a product introduction
The keithley 2612a is a two-channel system digital source meter, each channel can be independently configured as a precision voltage source, a high-precision current source, or a digital multi-meter. Each channel can output signals up to 200V or 10A pulses (1.5A DC) and can measure signals down to 1fA or 1µV. Each channel has its own display and keypad for easy single channel operation. At the same time, the two channels can also be operated synchronously via the internal bus or external triggering for complex two-channel testing.
The keithley 2612a also features powerful waveform generation and measurement functions. It can generate arbitrary waveforms, square waveforms, triangular waveforms, sawtooth waveforms and other commonly used waveforms, and you can set the waveform parameters such as amplitude, frequency, bias and so on. It can also generate voltage or current pulses and set pulse parameters such as width, duty cycle, delay, etc. It can also be used as an electronic load. It can also be used as an electronic load to absorb or amplify external signals, and load parameters such as resistance, capacitance, inductance, etc. can be set. It can also measure the input signal and display the measurement results such as voltage, current, power, resistance, capacitance, inductance, etc. It can also perform statistics on the measurement results. It can also analyze the measurement results statistically, such as the maximum value, minimum value, average value, standard deviation and so on.
The eithley 2612a also has flexible programming and control features. It has a built-in Test Script Processor (TSP®) that allows complete test programs (scripts) to be executed in the instrument without the need for an external controller. It also provides an embedded TSP® Express software tool that allows users to quickly and easily perform commonly used I-V tests without programming or installing software. It also supports a variety of communication interfaces, such as GPIB, USB, and LAN, allowing remote control and data transfer in different ways. It is also LXI Class C compliant, providing high-speed data transfer and enabling fast remote testing, monitoring and troubleshooting.
keithley 2612a product applications
The keithley 2612a is a high-performance instrument for a wide range of I-V source measurement applications that meet your needs for accuracy, speed, and flexibility. It can be used in the following areas:
- Semiconductor device testing: such as diodes, transistors, MOSFETs, LEDs, etc.
- Optoelectronic device testing: such as photodiodes, laser diodes, solar cells, etc.
- Sensor testing: such as temperature sensors, pressure sensors, humidity sensors, etc.
- Battery testing: such as lithium-ion batteries, nickel-metal hydride batteries, lead-acid batteries, etc.
- Material testing: such as conductive materials, magnetic materials, piezoelectric materials, etc.
- Teaching experiments: such as basic circuit experiments, digital logic experiments, analog circuit experiments, etc.